Journal- und Konferenzbeiträge

2024

  • Locke, C.; Guggemos, M.; Maier, L.; Hartmann, C.; Volk, W.; Günther, D.: Hybrid joining of cast aluminum and sheet steel through compound sand casting and induction heating to enable thin-walled lightweight structures. Journal of Materials Processing Technology 324, 2024, 118261 mehr…

2023

  • Baitiang, C.; Weiss, K.; Krüger, M.; Volk, W.; Lechner, P.: Data-Driven Process Analysis for Iron Foundries with Automatic Sand Molding Process (accepted). International Journal of Metalcasting, 2023 mehr…
  • Bauer, Anna; Hartmann, Christoph: Spatio-Trajectorial Optical Flow for Higher-Order Deformation Analysis in Solid Experimental Mechanics. Sensors 23 (9), 2023, 4408 mehr…
  • Bauer, Constantin; Erber, Maximilian; Fuchs, Georg; Brügge, Tobias; Hartmann, Christoph; Volk, Wolfram: Analysis of the melting and solidification process of aluminum in a mirror furnace using Fiber-Bragg-Grating and numerical models. IOP Conference Series: Materials Science and Engineering 1281 (1), 2023, 012063 mehr…
  • Bian, Qiang; Bauer, Constantin; Stadler, Andrea; Buchfellner, Fabian; Jakobi, Martin; Volk, Wolfram; Koch, Alexander W.; Roths, Johannes: Monitoring strain evolution and distribution during the casting process of AlSi9Cu3 alloy with optical fiber sensors. Journal of Alloys and Compounds 935, 2023, 168146 mehr…
  • Böhm, V.; Gruber, M.; Abele, E.; Steinbauer, C.; Victoria-Hernández, J.; Letzig, D.; Ben Khalifa, N.; Volk, W.: Influence of Equal-Channel Angular Pressing on the Microstructure and Texture of Mg-Zn-Y-Zr-RE Alloy Sheets. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023 mehr…
  • Erber, Maximilian; Rosnitschek, Tobias; Bauer, Constantin; Ali Güldali, Muhammet; Alber-Laukant, Bettina; Tremmel, Stephan; Volk, Wolfram; Hartmann, Christoph: Predicting the local solidification time using spherical neural networks. IOP Conference Series: Materials Science and Engineering 1281 (1), 2023, 012037 mehr…
  • Gilch, Ines; Hartmann, Christoph; Grünhag, Benedikt; Volk, Wolfram; Schauerte, Benedikt; Leuning, Nora; Hameyer, Kay: Residual stresses and magnetic material properties of embossed and cut magnetic flux barriers in non-oriented electrical steel under tensile load. 2023 13th International Electric Drives Production Conference (EDPC), IEEE, 2023 mehr…
  • Hartmann, C.; Vitzthum, S.; Maier, L.; Volk, W.: Model-Based Evaluation of Methods for the Determination of the Onset of Yielding by Temperature Measurement. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023 mehr…
  • Holzer, K.; Schaal-Mulacek, H.; Marker, E.; Volk, W.: Kostenreduktion in der Prototypenfertigung. Zeitschrift für wirtschaftlichen Fabrikbetrieb 118 (7-8), 2023, 511-515 mehr…
  • Holzer, K.; Füchsle, F.; Steinlehner, F.; Ettemeyer, F.; Volk, W.: Potential of Ultra-High Performance Fiber Reinforced Concrete UHPFRC in Metal Forming Technology. In: Lecture Notes in Production Engineering. Springer International Publishing, 2023 mehr…
  • Holzer, K.; Maier, L.; Böhm, V.; Volk, W.: Dimensional precision and wear of a new approach for prototype tooling in deep drawing. IOP Conference Series: Materials Science and Engineering 1284 (1), 2023, 012078 mehr…
  • Julika Hoyer, Simon Kammerloher, Wolfram Volk: Compound Casting and Following Process Route. InCeight Casting C8, Fraunhofer Verlag, 2023 mehr…
  • Kammerloher, Simon; Kirchebner, Benedikt; Reberger, Erwin; Weidner, Christoph; Volk, Wolfram; Lechner, Philipp: Binder Content and Storing Conditions of Inorganically-Bound Foundry Cores Determine the Intensity and Onset Time of Gas Release in Metal Casting. International Journal of Metalcasting, 2023 mehr…
  • Kirchebner, B.; Weidner, C.; Plötz, M.; Rehekampff, C.; Volk, W.; Lechner, P.: Liquid Metal Jetting of Aluminum Parts with Salt Support Structures. 2023 International Solid Freeform Fabrication Symposium, 2023 mehr…
  • Kirchebner, Benedikt; Kammerloher, Simon; Fuchs, Georg; Reberger, Erwin; Volk, Wolfram; Lechner, Philipp: A Test Stand for Quantifying the Core Gas Release and the Gas Permeability of Inorganically-Bound Foundry Cores. International Journal of Metalcasting, 2023 mehr…
  • Lechner, P.; Hartmann, C.; Wolf, D.; Habiba, A.: Deviation compensation in LPBF series production]{Deviation compensation in LPBF series production via statistical predeformation and structural pattern analysis} (accepted). Journal of Intelligent Manufacturing, 2023 mehr…
  • Lechner, P.; Scandola, L.; Maier, D.; Hartmann, C.; Lieb, M.: Global Control of the Part‘s Geometry During Free-Form Bending with Neural Networks (accepted). International Conference on the Technology of Plasticity, 2023 mehr…
  • Locke, C.; Guggemos, M.; Gruber, M.; Maier, L.; Mayr, L.; Weiß, T.; Volk, W.; Günther, D.: Compound Casting of Aluminum with Sheet Steel in 3D Sand Casting Using an Inductive Heating System. Metals 13 (2), 2023, 354 mehr…
  • Maier, D.; Scandola, L.; Werner, M.; Stebner, S.; Ismail, A.; Lohmann, B.; Münstermann, S.; Volk, W.; Lechner, P.: Experimental analysis on the influence of freeform bending on Barkhausen noise for steel tubes. Materials Research Proceedings, Materials Research Forum LLC, 2023Esaform 2023, 2091-2100 mehr…
  • Maier, L.; Eder, M.; Norz, R.; Volk, W.: Innovative experimental setup for the investigation of material models with regard to strain hardening behavior. IOP Conference Series: Materials Science and Engineering 1284 (1), 2023, 012071 mehr…
  • Martinitz, L; Hartmann, C: An artificial neural network approach on crystal plasticity for material modelling in macroscopic simulations. IOP Conference Series: Materials Science and Engineering 1284 (1), 2023, 012052 mehr…
  • Norz, R.; Valencia, Fabuer R.; Vitzthum, S.; Ungureanu, B.; Gerke, S.; Brünig, M.; Volk, W.;: Investigation of the influence of loading direction after pre-forming on the formability and mechanical properties of DP600. Materials Research Proceedings, Materials Research Forum LLC, 2023 mehr…
  • Nürnberger, Anian; Müller, Daniel; Martinitz, Lukas; Hartmann, Christoph; Tobie, Thomas; Stahl, Karsten; Volk, Wolfram: Advantages in the production of power transmitting gears by fineblanking. The International Journal of Advanced Manufacturing Technology, 2023 mehr…
  • Ott, M.; Li, Y.; Krasselt,J.; Steinlehner,F.; Haberkern,P.; Albers, A.; Volk, W.: Numerical and experimental investigation on the applicability of elastomer tooling components for the manufacturing of undercut geometries by sheet metal forming. Materials Research Proceedings, Materials Research Forum LLC, 2023 mehr…
  • Ott, M.; Mayer, M.; Li, Y.; Steinlehner, F.; Zaeh, M. F.; Volk, W.: Quantification of the Impact of Forming-Induced Residual Stresses on Subsequent Cutting Operations for Aluminum AA7075 Thick Sheets. In: Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023, 134-145 mehr…
  • Plötz, M.; Kirchebner, B.; Volk, W.; Lechner, P.: Influence of Thermal Process Parameters on the Properties of Material Jetted CuSn8 Components. Materials Science and Engineering A, 2023 mehr…
  • Rosnitschek, Tobias; Erber, Maximilian; Hartmann, Christoph; Alber-Laukant, Bettina; Volk, Wolfram; Tremmel, Stephan: Integrating Geometric Metamodel-Assisted Process Assurance into Topology Optimization of Low-Pressure Die Castings. In: Proceedings of the Munich Symposium on Lightweight Design 2022. Springer International Publishing, 2023 mehr…
  • Scandola, L.; Tschannerl, J.; Maier, D.; Werner, M. K.; Hartmann, C.; Volk, W.: Impact of the process velocities on the quality of free-form bent parts. IOP Conference Series: Materials Science and Engineering 1284 (1), 2023, 012061 mehr…
  • Scandola, L.; Werner, M. K.; Maier, D.; Volk, W.: Optimization of the Calibration Process in Freeform Bending Regarding Robustness and Experimental Effort. In: Lecture Notes in Production Engineering. Springer International Publishing, 2023 mehr…
  • Schrepfer, A.: Temperature measurement during blanking with enhanced speeds. Materials Research Proceedings, Materials Research Forum LLC, 2023 mehr…
  • Tröber, Philipp; Hackl, Alfred; Leitner, Harald; Welm, Markus; Demmel, Peter; Golle, Matthias; Volk, Wolfram: On the Sensitivity of a Tool–Workpiece Thermocouple to Chemical Composition and Microstructure. steel research international, 2023, 2200456 mehr…
  • Welm, Markus; Kindsmüller, Alexander; Tröber, Philipp; Dröse, Lukas; Volk, Wolfram: Stresses between die and slug in blanking and their significance for slug pulling. Production Engineering, 2023 mehr…
  • Werner, M.; Scandola, L.; Maier, D.; Volk, W.: Freeform Bending Tool Design for Rectangular Profiles and Its Influence on the Process. Journal of Manufacturing Science and Engineering 145 (10), 2023 mehr…

2022

  • Bauer, Anna; Volk, Wolfram; Hartmann, Christoph: Application of Fractal Image Analysis by Scale-Space Filtering in Experimental Mechanics. Journal of Imaging 8 (9), 2022, 230 mehr…
  • Bian, Qiang; Podhrazsky, Alexander; Bauer, Constantin; Stadler, Andrea; Buchfellner, Fabian; Kuttler, Rolf; Jakobi, Martin; Volk, Wolfram; Koch, Alexander W.; Roths, Johannes: Temperature and external strain sensing with metal-embedded optical fiber sensors for structural health monitoring. Optics Express 30 (19), 2022, 33449 mehr…
  • Budnick, D; Ghannoum, A; Steinlehner, F; Weinschenk, A; Volk, W; Huhn, S; Melek, W; Worswick, M: Predicting Dynamic Process Limits in Progressive Die Sheet Metal Forming. IOP Conference Series: Materials Science and Engineering 1238 (1), 2022, 012068 mehr…
  • Bustos Seibert, M.; Mazzei Capote, G.; Gruber, M.; Volk, W.; Osswald, T.: Manufacturing of a PET Filament from Recycled Material for Material Extrusion (MEX). Recycling 7 (5), 2022, 69 mehr…
  • Eder, M.; Gruber, M.; Volk, W.: Validation of material models for sheet metals using new test equipment. International Journal of Material Forming 15 (5), 2022 mehr…
  • Erber, Maximilian; Rosnitschek, Tobias; Hartmann, Christoph; Alber-Laukant, Bettina; Tremmel, Stephan; Volk, Wolfram: Geometry-based Assurance of Directional Solidification for Complex Topology-optimized Castings using the Medial Axis Transform. Computer-Aided Design 152, 2022, 103394 mehr…
  • Feistle, M.; Golle, R.; Volk, W.: Produktivitätssteigerung in Folgeverbundwerkzeugen. Kongress Stanztechnik, 2022 mehr…
  • Feistle, M.; Kindsmüller, A.; Pätzold, I.; Golle, R.; Volk, W.: Influence of Sheet Metal Pre-forming on Edge Crack Sensitivity using an AHSS Steel Grade. International Journal of Material Forming 15 (4), 2022 mehr…
  • Feistle, Martin; Golle, Roland; Volk, Wolfram: Edge Crack Test Methods for AHSS Steel Grades: A Review and Comparisons. Journal of Materials Processing Technology, 2022 mehr…
  • Gilch, Ines and Schauerte, Benedikt and Neuwirth, Tobias and Sebold, Simon and Schulz, Michael and Hameyer, Kai and Volk, Wolfram: Influence of pyramidal and spherical embossing on residual stress distribution and magnetic material properties of non-oriented electrical steel. Forming Technology Forum 2022, 2022 mehr…
  • Gruber, M.; Leitner, P.; Auer, M.; Illgen, C.; Frint, P.; Wagner, M. F.-X.; Volk, W.: A Novel Method for the Determination of High Temperature FLCs of ECAP-Processed Aluminum AA5083 Sheet Metal. Key Engineering Materials 926, 2022, 1039-1050 mehr…
  • Gruber, M.; Spörer, T.; Illgen, C.; Frint, P.; Wagner, M. F.-X.; Lechner, P.; Volk, W.: Effect of Equal-Channel Angular Pressing and Targeted Heat Treatment on Aluminum AA7075 Sheet Metal. In: Characterization of Minerals, Metals, and Materials 2022. Springer International Publishing, 2022, 25-36 mehr…
  • Hoyer, J.; Kammerloher, S.; Holzer, K.; Volk, W.; Liu, Z.; Ringel, A.; Hirt, G.: Flat rolling of continuously cast Al-Cu compound strips with structured interface. 36. Aachener Stahlkolloquium Umformtechnik, 2022 mehr…
  • Ismail, A.; Maier, D.; Stebner, S.; Volk, W.; Münstermann, S.; Lohmann, B.: Control System Design for a Semi-Finished Product Considering Over- and Underbending. The 28th Saxon Conference on Forming Technology SFU and the 7th International Conference on Accuracy in Forming Technology ICAFT, MDPI, 2022 mehr…
  • Lechner, P.; Reberger, E.; Gruber, M.; Kammerloher, S.; Hartmann, C.; Volk, W.: Localization of Cavities in Cast Components via Impulse Excitation and a Finite Element Analysis. Production Engineering, 2022 mehr…
  • Maier, D.; Kerpen, C.; Werner, M.K.; Scandola, L.; Lechner, P.; Stebner, S.C.; Ismail, A.; Lohmann, B.; Münstermann, S.; Volk, W.: Development of a partial heating system for freeform bending with movable die. Proceedings on Hot Sheet Metal forming of High-Performance Steel, 20228th International Conference, 767-774 mehr…
  • Maier, L.; Hartmann, C.; Ünver, B.; Volk, W.: Three-Dimensional Control Point Based Surface Description for Data Reduction, Reverse Engineering and Springback Compensation in Sheet Metal Forming. In: The Minerals, Metals &Materials Series. Springer International Publishing, 2022 mehr…
  • Norz, R.; Vitzthum, S.; Volk, W.;: Failure behaviour of various pre-formed steel sheets with respect to the mechanical grain boundary properties. International Journal of Material Forming 15 (4), 2022 mehr…
  • Norz, R.; Manopulo, N.; Sigvant, M.; Chezan, A. R.; Volk, W.: Prediction of Necking Initiation in Case of Abrupt Changes in the Loading Direction. In: The Minerals, Metals & Materials Series. Springer International Publishing, 2022 mehr…
  • Norz, R.; Valencia, F.R.; Gerke, S.; Brünig, M.; Volk, W.: Experiments on forming behaviour of the aluminium alloy AA6016. IOP Conference Series: Materials Science and Engineering 1238 (1), 2022, 012023 mehr…
  • Norz, R.; Volk, W.: Influence of Loading Direction on the Mechanical Parameters of Pre-formed Materials in Tensile Test. In: The Minerals, Metals & Materials Series. Springer International Publishing, 2022 mehr…
  • Nürnberger, Anian; Müller, Daniel; Martinitz, Lukas; Hartmann, Christoph; Tobie, Thomas; Stahl, Karsten; Volk, Wolfram: Comparative study of v-ring indenter configurations in fineblanking in order to derive tool design guidelines. The International Journal of Advanced Manufacturing Technology 123 (11-12), 2022, 4171-4179 mehr…
  • Plötz, M.; Kirchebner, B.; Volk, W.; Lechner, P.: Analysis of CuSn8 components manufactured using the material jetting process. Copper Alloys 2022 , Kupferverband, 2022 mehr…
  • Pätzold, I; Tröber, P; Welm, M; Volk, W: Blanking of Stainless Steel. IOP Conference Series: Materials Science and Engineering 1238 (1), 2022, 012030 mehr…
  • Scandola, L.; Maier, D.; Werner, M. K.; Hartmann, C.; Volk, W.: Automatic Extraction and Conversion of the Bending Line from Parametric and Discrete Data for the Free-Form Bending Process. In: The Minerals, Metals &Materials Series. Springer International Publishing, 2022 mehr…
  • Schrepfer, A; Schott, A; Tröber, P; Keunecke, M; Welm, M; Steinlehner, F; Golle, R; Volk, W: Reduction of adhesive wear with use of tool coating reducing thermoelectric currents. IOP Conference Series: Materials Science and Engineering 1238 (1), 2022, 012033 mehr…
  • Stebner, S. C.; Maier, D.; Ismail, A.; Dölz, M.; Lohman, B.; Volk, W.; Münstermann, S.: Extension of a Simulation Model of the Freeform Bending Process as Part of a Soft Sensor for a Property Control. Key Engineering Materials 926, 2022, 2137-2145 mehr…
  • Vitzthum, S.; Rebelo Kornmeier, J.; Hofmann, M.; Gruber, M.; Maawad, E.; Batista, A.; Hartmann, C.; Volk, W.: In-situ analysis of the thermoelastic effect and its relation to the onset of yielding of low carbon steel. Materials & Design 219, 2022, 110753 mehr…
  • Vitzthum, S.; Gruber, M.; Rebelo-Kornmeier, J.; Hofmann, M.; Volk, W.: Experimental Investigation of Factors Influencing the Determination of the Onset of Yielding by Temperature Measurement. Key Engineering Materials 926, 2022, 1021--1029 mehr…
  • Vitzthum, S.; Kornmeier, J. R.; Hofmann, M.; Gruber, M.; Norz, R.; Maawad, E.; Mendiguren, J.; Volk, W.: In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel. Materials Science and Engineering: A, 2022, 144097 mehr…
  • Volk, W.; Eder, M; Gruber, M.: Potentials for Material Card Validation Using an Innovative Tool. The 12th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2022), 2022 mehr…

2021

  • Athreya, S; Weinschenk, A; Steinlehner, F; Budnick, D; Worswick, M; Volk, W.; Huhn, S.: Parametric Shape Optimization of Stretch Webs in a Progressive Die Process using a Neural Network Surrogate Model. IOP Conference Series: Materials Science and Engineering 1157 (1), 2021, 012081 mehr…
  • Bian, Qiang; Bauer, Constantin; Stadler, Andrea; Lindner, Markus; Jakobi, Martin; Volk, Wolfram; Koch, Alexander W.; Roths, Johannes: In-Situ High Temperature and Large Strain Monitoring During a Copper Casting Process Based on Regenerated Fiber Bragg Grating Sensors. Journal of Lightwave Technology 39 (20), 2021, 6660-6669 mehr…
  • Boehm, Lucas; Hartmann, Christoph; Gilch, Ines; Stoecker, Anett; Kawalla, Rudolf; Wei, Xuefei; Hirt, Gerhard; Heller, Martin; Korte-Kerzel, Sandra; Leuning, Nora; Hameyer, Kay; Volk, Wolfram: Grain Size Influence on the Magnetic Property Deterioration of Blanked Non-Oriented Electrical Steels. Materials 14 (22), 2021, 7055 mehr…
  • Budnick, D.; Steinlehner, F.; Weinschenk, A.; Volk, W.; Melek, W.; Worswick, M.; Huhn, S.: Simulation of Dynamic Effects in Progressive Die Operation and Control. IOP Conference Series: Materials Science and Engineering 1157 (1), 2021, 012085 mehr…
  • Chen, Hui; Giannopoulou, Danai; Greß, Thomas; Isakovic, Jonas; Mittler, Tim; Volk, Wolfram; Khalifa, Noomane Ben: Homogenization of the interfacial bonding of compound-cast AA7075/6060 bilayer billets by co-extrusion. International Journal of Material Forming, 2021 mehr…
  • Eder, M; Gruber, M; Manopulo, N; Volk, W: Potentials for material card validation using an innovative tool. IOP Conference Series: Materials Science and Engineering 1157 (1), 2021, 012067 mehr…
  • Ettemeyer, Florian; Schweinefuß, Maria; Lechner, Philipp; Stahl, Jens; Greß, Thomas; Kaindl, Johannes; Durach, Linus; Volk, Wolfram; Günther, Daniel: Characterisation of the decoring behaviour of inorganically bound cast-in sand cores for light metal casting. Journal of Materials Processing Technology 296, 2021, 117201 mehr…
  • Feistle, M.: Produktivitätssteigerung in Folgeverbundwerkzeugen. blechnet, 2021 mehr…
  • Franceschi, A.; Stahl, J.; Kock, C.; Selbmann, R.; Ortmann-Ishkina, S.; Jobst, A.; Merklein, M.; Kuhfuß, B.; Bergmann, M.; Behrens, B.-A.; Volk, W.; Groche, P.: Strategies for residual stress adjustment in bulk metal forming. Archive of Applied Mechanics, 2021 mehr…
  • Gilch, Ines; Neuwirth, Tobias; Schauerte, Benedikt; Leuning, Nora; Sebold, Simon; Hameyer, Kay; Schulz, Michael; Volk, Wolfram: Impact of residual stress evoked by pyramidal embossing on the magnetic material properties of non-oriented electrical steel. Archive of Applied Mechanics, 2021 mehr…
  • Gilch, Ines; Vogt, Simon; Neuwirth, Tobias; Schauerte, Benedikt; Hameyer, Kay; Schulz, Michael; Gustschin, Alex; Volk, Wolfram; Weiss, Hannes Alois: Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel. In: Forming the Future. Springer International Publishing, 2021 mehr…
  • Greß, T.; Glück Nardi, V.; Schmid, S.; Hoyer, J.; Rizaiev, Y.; Boll, T.; Seils, S.; Tonn, B.; Volk, W.: Vertical continuous compound casting of copper aluminum bilayer rods. Journal of Materials Processing Technology 288, 2021, 1-16 mehr…
  • Gruber, M.; Yang, Y.; Illgen, C.; Frint, P.; Wagner, M.; Volk, W.: Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal. In: Forming the Future. Springer International Publishing, 2021 mehr…
  • Haberkern, P.; Ott, M.; Volk, W.; Albers, A.: An approach to validate simulation models for the optimization of fiber-reinforced bead patterns. NAFEMS Deutschland, Österreich, Schweiz GmbH, 2021 mehr…
  • Hartmann, C.; Maier, L.; Volk, W.: Springback and compensation in sheet metal forming reconsidered as an ill-posed problem. IOP Conference Series: Materials Science and Engineering 1157 (1), 2021, 12044 mehr…
  • Hartmann, C.; Weiss, H.A.; Lechner, P.; Volk, W.; Neumayer, S.; Fitschen, J.H.; Steidl, G.: Measurement of strain, strain rate and crack evolution in shear cutting. Journal of Materials Processing Technology 288, 2021, 116872 mehr…
  • Hartmann, C.; Welm, M.; Schreyer, S.; Hartmann, C.; Volk, W.: A Modular Car Body for Sustainable, Cost-Effective ,and Versatile Vehicle Development Zeitschriftentitel: MDPI Technologies. MDPI Technologies 9, 2021, 1-9 mehr…
  • Hartmann, H.; Gruber, M.; Günther, D.; Volk, W.; Kalchschmid, V.; Angerer, K.; Roth, S.; Rösch, M.; Hohmann, A.: Aluminium schmelzen mit Windstrom: Potenzialstudie WindMelt. Gießerei 108 (10), 2021, 50-54 mehr…
  • Heller, Martin; Stöcker, Anett; Kawalla, Rudolf; Leuning, Nora; Hameyer, Kay; Wei, Xuefei; Hirt, Gerhard; Böhm, Lucas; Volk, Wolfram; Korte-Kerzel, Sandra: Characterization Methods along the Process Chain of Electrical Steel Sheet—From Best Practices to Advanced Characterization. Materials 15 (1), 2021, 32 mehr…
  • Illgen, C.; Bohne, B.; Wagner, M. F.-X.; Gruber, M.; Volk, W.; Frint, P.: Facing the Issues of Sheet Metal Equal‐Channel Angular Pressing: A Modified Approach Using Stacks to Produce Ultrafine‐Grained High Ductility AA5083 Sheets. Advanced Engineering Materials, 2021, 2100244 mehr…
  • Ismail, A.; Maier, D.; Stebner, S.; Volk, W.; Münstermann, S.; Lohmann, B.: A Structure for the Control of Geometry and Properties of a Freeform Bending Process. IFAC-PapersOnLine 54 (11), 2021, 115-120 mehr…
  • Kammerloher, Simon; Hoyer, Julika; Lechner, Philipp; Mittler, Tim; Volk, Wolfram: A Method for Characterising the Influence of Casting Parameters on the Metallurgical Bonding of Copper and Steel Bimetals. Materials 14 (20), 2021, 6223 mehr…
  • Kindsmüller, Alexander; Schrepfer, Agnes; Stahl, Jens; Pätzold, Isabella; Nürnberger, Anian; Golle, Roland; Volk, Wolfram: Influence of cutting parameters on mechanisms causing slug pulling. Production Engineering, 2021 mehr…
  • Kirchebner, Benedikt; Ploetz, Maximilian; Rehekampff, Christoph; Lechner, Philipp; Volk, Wolfram: Influence of Salt Support Structures on Material Jetted Aluminum Parts. Materials 14 (15), 2021, 4072 mehr…
  • Kirchebner, Benedikt; Rehekampff, Christoph; Tröndle, Martin; Lechner, Philipp; Volk, Wolfram: Analysis of salts for use as support structure in metal material jetting. Production Engineering, 2021 mehr…
  • Lechner, P.; Hartmann, C.; Ettemeyer, F.; Volk, W.: A Plane Stress Failure Criterion for Inorganically-Bound Core Materials. Materials 14 (2), 2021 mehr…
  • Lechner, Philipp; Heinle, Philipp; Hartmann, Christoph; Bauer, Constantin; Kirchebner, Benedikt; Dobmeier, Fabian; Volk, Wolfram: Feasibility of Acoustic Print Head Monitoring for Binder Jetting Processes with Artificial Neural Networks. Applied Sciences 11 (22), 2021, 10672 mehr…
  • Lechner, Philipp; Stahl, Jens; Hartmann, Christoph; Ettemeyer, Florian; Volk, Wolfram: Mohr–Coulomb characterisation of inorganically-bound core materials. Journal of Materials Processing Technology 296, 2021, 117214 mehr…
  • Leuning, Nora; Jaeger, Markus; Schauerte, Benedikt; Stöcker, Anett; Kawalla, Rudolf; Wei, Xuefei; Hirt, Gerhard; Heller, Martin; Korte-Kerzel, Sandra; Böhm, Lucas; Volk, Wolfram; Hameyer, Kay: Material Design for Low-Loss Non-Oriented Electrical Steel for Energy Efficient Drives. Materials 14 (21), 2021, 6588 mehr…
  • Lindner, Markus; Stadler, Andrea; Hamann, Georg; Fischer, Bennet; Jakobi, Martin; Heilmeier, Florian; Bauer, Constantin; Volk, Wolfram; Koch, Alexander W.; Roths, Johannes: Fiber Bragg Sensors Embedded in Cast Aluminum Parts: Axial Strain and Temperature Response. Sensors 21 (5), 2021, 1680 mehr…
  • Maier, D.; Stebner, S.; Ismail, A.; Dölz, M.; Lohmann, B.; Münstermann, S.; Volk, W.: The influence of freeform bending process parameters on residual stresses for steel tubes. Advances in Industrial and Manufacturing Engineering 2, 2021, 100047 mehr…
  • Maier, L.; Hartmann, C.; Volk, W.: Parameterized data handling for forming tool tryout: reverse engineering, data consolidation and springback compensation. IOP Conference Series: Materials Science and Engineering 1157 (1), 2021, 12035 mehr…
  • Müller, D.; Stahl, J.; Nürnberger, A.; Golle, R.; Tobie, T.; Volk, W.; Stahl, K.: Shear cutting induced residual stresses in involute gears and resulting tooth root bending strength of a fineblanked gear. Archive of Applied Mechanics, 2021 mehr…
  • Müller, Daniel; Stahl, Jens; Nürnberger, Anian; Golle, Roland; Tobie, Thomas; Volk, Wolfram; Stahl, Karsten: Shear cutting induced residual stresses in involute gears and resulting tooth root bending strength of a fineblanked gear. Archive of Applied Mechanics 91 (8), 2021, 3679-3692 mehr…
  • Ott, M.; Haberkern, P.; Gruber, M.; Hartmann, C.; Risch, T.; Wunderling, C.; Albers, A.; Volk, W.: Load-specific variant generation of bead cross sections in sheet metal components by unidirectional carbon fibre reinforcement. IOP Conference Series: Materials Science and Engineering 1157 (1), 2021, 012093 mehr…
  • Rehekampff, Christoph; Kirchebner, Benedikt; Krebs, Florian; Irlinger, Franz; Lueth, Tim C.: Inline Topology Measurement of Material Jetted Metal Parts. Volume 2B: Advanced Manufacturing, American Society of Mechanical Engineers, 2021 mehr…
  • Rosnitschek, Tobias; Erber, Maximilian; Hartmann, Christoph; Volk, Wolfram; Rieg, Frank; Tremmel, Stephan: Combining Structural Optimization and Process Assurance in Implicit Modelling for Casting Parts. Materials 14 (13), 2021, 3715 mehr…
  • Scandola, L.; Büdenbender, C.; Till, M.; Maier, D.; Ott, M.; Behrens, B.-A.; Volk, W.: Development of a numerical compensation framework for geometrical deviations in bulk metal forming exploiting a surrogate model and computed compatible stresses. International Journal of Material Forming, 2021 mehr…
  • Schauerte, Benedikt; Gilch, Ines; Neuwirth, Tobias; Sebold, Simon; Leuning, Nora; Schulz, Michael; Volk, Wolfram; Hameyer, Kay: Alternative Magnetflussführung in Elektromotoren. Forschung im Ingenieurwesen, 2021 mehr…
  • Stahl, Jens; Pätzold, Isabella; van den Bosch, Lucas; Kindsmüller, Alexander; Golle, Roland; Volk, Wolfram: The Frictional Force between Slug and Die in Shear Cutting after Material Separation. Key Engineering Materials 883, 2021, 285-293 mehr…
  • Stebner, S.; Maier, D.; Ismail, Ahmed; Balyan, S.; Dölz, M.; Lohmann, B.; Volk, W.; Münstermann, S.: A System Identification and Implementation of a Soft Sensor for Freeform Bending. Materials 14 (16), 2021, 4549 mehr…
  • Stöcker, Anett; Weiner, Max; Korpała, Grzegorz; Prahl, Ulrich; Wei, Xuefei; Lohmar, Johannes; Hirt, Gerhard; Heller, Martin; Korte-Kerzel, Sandra; Böhm, Lucas; Volk, Wolfram; Leuning, Nora; Hameyer, Kay; Kawalla, Rudolf: Integrated Process Simulation of Non-Oriented Electrical Steel. Materials 14 (21), 2021, 6659 mehr…
  • Tröber, Philipp; Welm, Markus; Weiss, Hannes A.; Demmel, Peter; Golle, Roland; Volk, Wolfram: Temperature, thermoelectric current and adhesion formation during deep drawing. Wear 477, 2021, 203839 mehr…
  • Volk, W., Feistle, M., Steinlehner, F.: KEKS - Kompakte Einheit zur kostengünstigen Stempelgeschwindigkeitsanpassung – EFB-Forschungsbericht Nr. 551. Europäische Forschungs­gesellschaft für Blechverarbeitung e.V., 2021, mehr…
  • Volk, Wolfram; Gilch, Ines; Nürnberger, Anian; Prauser, Stefanie; Stahl, Jens: Gezielte Nutzung umformtechnisch induzierter Eigenspannungen in metallischen Bauteilen. Forschung im Ingenieurwesen, 2021 mehr…
  • Wei, Xuefei; Krämer, Alexander; Hirt, Gerhard; Stöcker, Anett; Kawalla, Rudolf; Heller, Martin; Korte-Kerzel, Sandra; Böhm, Lucas; Volk, Wolfram; Leuning, Nora; Hameyer, Kay; Lohmar, Johannes: Influence of Process Parameters on Grain Size and Texture Evolution of Fe-3.2 wt.-% Si Non-Oriented Electrical Steels. Materials 14 (22), 2021, 6822 mehr…
  • Werner, M. K.; Maier, D.; Scandola, L.; Volk, W.: Motion profile calculation for freeform bending with moveable die based on tool parameters. ESAFORM 2021, 2021 mehr…

2020

  • Behrens, B.; Volk, W.; Maier, D.; Scandola, L.; Ott, M.; Brunotte, K.; Büdenbender, C.; Till, M.: A Combined Numerical and Experimental Investigation on Deterministic Deviations in Hot Forging Processes. Procedia Manufacturing 47, 2020, 295-300 mehr…
  • Chen, H.; Giannopoulou, D.; Greß, T.; Mittler, T.; Isakovic, J., Volk, W.; Ben Khalifa, N.: Co-extrusion of compound-cast AA7075/6060 bilayer billets at various temperatures. 13th International Conference on the Technology of Plasticity, 2020 mehr…
  • Chen, H.; Giannopoulou, D.; Greß, T.; Mittler, T.; Volk, W.; Ben Khalifa, N.: Influence of heat treatment on interfacial bonding in co-extrusion of compound-cast AA7075/6060 bilayer billets. 12th International Aluminum Extrusion Technology Seminar & Exposition, 2020 mehr…
  • Ettemeyer, Florian; Lechner, Philipp; Hofmann, Tobias; Andrä, Heiko; Schneider, Matti; Grund, Dominik; Volk, Wolfram; Günther, Daniel: Digital sand core physics: Predicting physical properties of sand cores by simulations on digital microstructures. International Journal of Solids and Structures 188-189, 2020, 155-168 mehr…
  • Glück Nardi, V.; Greß, T.; Tonn, B.; Volk, W.: Modelling of intermetallic layers formation during solid-liquid joining of dissimilar metallic materials. IOP Conference Series: Materials Science and Engineering 861, 2020, 1-8 mehr…
  • Greß, T.; Glück Nardi, V.; Mittler, T.; Schmid, S.; Buchberger, P.; Tonn, B.; Volk, W.: Interface Formation and Characterization of Brass/Aluminum Compounds Fabricated Through Die Casting and Semi-Continuous Casting. International Journal of Metalcasting 14, 2020, 564-579 mehr…
  • Greß, T.; Gruber, M.; Stahl, J.; Wittmann, S.; Steinlehner, F.; Glück Nardi, V.; Tonn, B.; Volk, W.: Experimental and numerical investigations into the deformation and fracture behavior of intermetallics and base materials in as-cast Al-Cu compounds. Materials Today Communications 25, 2020, 1-11 mehr…
  • Greß, T.; Mittler, T.; Chen, H.; Stahl, J.; Schmid, S.; Ben Khalifa, N.; Volk, W.: Production of aluminum AA7075/6060 compounds by die casting and hot extrusion. Journal of Materials Processing Technology 280, 2020, 1-12 mehr…
  • Greß, T.; Mittler, T.; Volk, W.: Casting methods for the production of rotationally symmetric copper bimetals. Materials Science and Technology 36 (8), 2020, 906-916 mehr…
  • Greß, T.; Schmid, S.; Mittler, T.; Glück Nardi, V.; Tonn, B.; Volk, W.: Kontinuierliches Verbundgießen von Messing/Aluminium-Hybriden. Symposium Stranggießen 2020, 2020 mehr…
  • Greß, Thomas; Gruber, Maximilian; Stahl, Jens; Wittmann, Simon; Steinlehner, Florian; Glück Nardi, Vanessa; Tonn, Babette; Volk, Wolfram: Experimental and numerical investigations into the deformation and fracture behavior of intermetallics and base materials in as-cast Al-Cu compounds. Materials Today Communications 25, 2020, 101278 mehr…
  • Heilmeier, F.; Koos, R.; Hornberger, P.; Hiller, J.; Weraneck, K.; Jakobi, M.; Koch, A. W.; Volk, W.: Calibration of cast-in fibre Bragg gratings for internal strain measurements in cast aluminium by using neutron diffraction. Measurement, 2020 mehr…
  • Heilmeier, F.; Koos, R.; Singer, M.; Bauer, C.; Hornberger, P.; Hiller, J.; Volk, W.: Evaluation of Strain Transition Properties between Cast-In Fibre Bragg Gratings and Cast Aluminium during Uniaxial Straining. Sensors, 2020 mehr…
  • Illgen, C.; Frint, P.; Gruber, M.; Volk, W.; Wagner, M.: Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP. In: Light Metals 2020. Springer International Publishing, 2020, 362-369 mehr…
  • Landesberger, M.; Koos, R.; Erber, M.; Pernumian, M.; Masaggia, S.; Hoelzel, M.; Volk, W.: Phase transition and microstructure investigation of perferritic isothermed ductile iron (IDI). International Journal of Cast Metals Research, 2020 mehr…
  • Landesberger, M.; Koos, R.; Hofmann, M.; Li, X.; Boll, T.; Petry, W.; Volk, W.: Phase Transition Kinetics in Austempered Ductile Iron (ADI) with Regard to Mo Content. Materials 13 (22), 2020, 1-23 mehr…
  • Lechner, P.; Ettemeyer, F.; Volk, W.: Ein mechanisches Bruchmodell für wasserglas-gebundene Formstoffe. Formstoff-Forum, 2020 mehr…
  • Lechner, P.; Fuchs, G.; Hartmann, C.; Steinlehner, F.; Ettemeyer, F.; Volk, W.: Acoustical and Optical Determination of Mechanical Properties of Inorganically-Bound Foundry Core. Materials (13), 2020 mehr…
  • Lindner, M.; Bernard, D.; Heilmeier, F.; Jakobi, M.; Volk, W.; Koch, A. W.; Roths, J.: Transition from purely elastic to viscoelastic behavior of silica optical fibers at high temperatures characterized using regenerated Bragg gratings. Optics Express 28 (5), 2020, 7323–7340 mehr…
  • Norz, R.; Volk, W.: Semi – automatic approach for the creation of non - proportional load paths. IOP Conference Series: Materials Science and Engineering 967, 2020, 012001 mehr…
  • Philipp Tröber, Markus Welm, Hannes A. Weiss, Peter Demmel, Roland Golle, Wolfram Volk: Lubricant-free forming by affecting thermoelectric currents. DFG, 2020, mehr…
  • Pintore, M.; Wölck, J.; Mittler, T.; Greß, T.; Tonn, B.; Volk, W.: Composite casting and characterization of Cu-Al bilayer compounds. International Journal of Metalcasting 14 (1), 2020, 155-166 mehr…
  • Schauerte, B.; Leuning, N.; Vogt, S.; Moll, I.; Weiss, H.; Neuwirth, T.; Schulz, M.; Volk, W.; Hameyer, K.: The influence of residual stress on flux-barriers of non-oriented electrical steel. Journal of Magnetism and Magnetic Materials 504, 2020, 166659 mehr…
  • Stahl, J.; Pätzold, I.; Golle, R.; Sunderkötter, C.; Sieurin, H.; Volk, W.: Effect of One- and Two-Stage Shear Cutting on the Fatigue Strength of Truck Frame Parts. Journal of Manufacturing and Materials Processing, 2020 mehr…
  • Steinlehner, F; Ott, M; Budnick, D; Weinschenk, A; Laumann, S; Worswick, M; Volk, W: Development of inline closed-loop vibration control in progressive die stamping using finite element simulation. IOP Conference Series: Materials Science and Engineering 967, 2020, 012035 mehr…
  • Tsutamori, H.; Amaishi, T.; Chorman, R.; Eder, M.; Vitzthum, S.; Volk, W.: Evaluation of Prediction Accuracy for Anisotropic Yield Functions Using Cruciform Hole Expansion Test. Journal of Manufacturing and Materials Processing 4 (2), 2020, 43 mehr…
  • Volk, W.; Norz, R.; Eder, M.; Hoffmann, H.: Influence of non-proportional load paths and change in loading direction on the failure mode of sheet metals. CIRP Annals - Manufacturing Technology 69, 2020 mehr…
  • Volk, W.; Vitzthum, S.; Gruber, M.; Ott, M.: Sustainability in the press shop. 2020 mehr…
  • Volk, W.; Gruber, M.; Norz, R.: Prediction of limit strains during non-proportional load paths with a change in loading direction. IOP Conference Series: Materials Science and Engineering 967, 2020, 012069 mehr…
  • Welm, M.; Tröber, P.; Weiss, H. A.; Demmel, P.; Golle, R.; Volk, W.: Thermoelectrically Based Approaches to Reduce Adhesive Wear During Blanking. JOM - The Journal of The Minerals, Metals & Materials Society (TMS) 72, 2020 mehr…
  • Welm, Markus; Tröber, Philipp; Weiss, Hannes Alois; Demmel, Peter; Golle, Roland; Volk, Wolfram: A Thermoelectrically Based Approach to Reduce Adhesive Wear During Blanking. In: The Minerals, Metals and Materials Society (Hrsg.): TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. Springer International Publishing, 2020, 1993-2007 mehr…
  • Wolfram Volk, Jens Stahl: Machbarkeits- und Geometrievorhersage von Blechbauteilen mit Durchsetzungen aus hoch- und höchstfesten Stählen. Forschung für die Praxis. Forschungsvereinigung Stahlanwendung e.V., 2020 mehr…

2019

  • Hartmann, C.; Volk, W.: Digital image correlation and optical flow analysis based on the material texture with application on high-speed deformation measurement in shear cutting. Digital Image & Signal Processing, Corgascience, UK, 2019International Conference on Digital Image & Signal Processing (DISP 2019), 1-8 mehr…
  • Alexander Kindsmüller: Ursache und Vorhersage von hochkommenden Stanzbutzen. 11. Kongress Stanztechnik, 2019 mehr…
  • Benkert, T.; Hartmann, C.; Eder, M.; Spekcmaier, F.; Volk, W.: MaterialModeler - From experimental raw data to a material model. SoftwareX 10, 2019, 100249 mehr…
  • Eder, M.; Gruber, M.; Volk, W.: Innovative Tool for Material Model Assessment and Improvement. 12th Forming Technology Forum, 2019 mehr…
  • Feistle, M.; Pätzold, I.; Golle, R.; Volk, W.: Open hole tensile tests for the determination of the edge-crack sensitivity of sheared holes dependent on specimen geometry, cutting parameters, and the notch factor. Procedia Manufacturing 29, 2019, 412-419 mehr…
  • Greß, T.; Mittler, T.; Schmid, S.; Chen, H.; Ben Khalifa, N.; Volk, W.: Thermal Analysis and Production of As-Cast Al 7075/6060 Bilayer Billets. International Journal of Metalcasting 13 (4), 2019, 817-829 mehr…
  • Greß, T.; Stahl, J.; Mittler, T.; Spano, L.; Chen, H.; Ben Khalifa, N.; Volk, W.: Mechanical characterization of as-cast AA7075/6060 and CuSn6/Cu99.5 compounds using an experimental and numerical push-out test. Materials Science and Engineering: A 751, 2019, 214-225 mehr…
  • Gruber, M.; Illgen, C.; Frint, P.; Wagner, M. F.-X.; Volk, W.: Numerical and experimental study on ECAP-processing parameters for efficient grain refinement of AA5083 sheet metal. Key Engineering Materials, 2019, 315-323 mehr…
  • Hartmann, C.; Hammerl, F.; Volk, W.: Experimental analysis of Roman coin minting. Journal of Archaeological Science: Reports 25, 2019, 498-506 mehr…
  • Hartmann, C.; Lechner, P.; Himmel, B.; Krieger, Y.; Lueth, T.C.; Volk, W.: Compensation for Geometrical Deviations in Additive Manufacturing. MDPI Technologies 7, 2019, 1-13 mehr…
  • Hartmann, C.; Opritescu, D.; Volk, W.: An artificial neural network approach for tool path generation in incremental sheet metal free-forming. Journal of Intelligent Manufacturing 30, 2019, 757-770 mehr…
  • Hartmann, C.; Volk, W: Variational methods in comparison to digital image correlation for full field deformation analysis under variable conditions. Determination and validation of material parameters for sheet metal simulation, Institute of Metal Forming and Casting, Technical University of Munich , 201912th Forming Technology Forum 2019, 1-7 mehr…
  • Hartmann, C.; Volk, W.: Knowledge-based incremental sheet metal free-forming using probabilistic density functions and voronoi partitioning. Procedia Manufacturing 29, 2019, 4-11 mehr…
  • Heilmeier, F.; Koos, R.; Volk, W.: Non-destructive in-situ strain measurement based on Fibre Bragg Gratings and neutron diffraction during solidification and cooling of aluminium alloys. EUROMAT 2019, 2019 mehr…
  • Heilmeier, F.; Koos, R.; Weraneck, K.; Lindner, M.; Jakobi, M.; Roths, J.; Koch, A. W.; Volk, W.;: In‑situ strain measurements in the plastic deformation regime inside casted parts using fibre‑optical strain sensors. Production Engineering, 2019 mehr…
  • LEUNING, Nora: Evaluation of the interdependency of mechanical cutting and magnetic anisotropy on the magnetic properties of FeSi electrical steel. PRZEGLĄD ELEKTROTECHNICZNY 1 (7), 2019, 3-8 mehr…
  • Lechner, P.; Filippov, P.; Kraschienski, N.; Ettemeyer, F.; Volk, W.: A Novel Method for Measuring Elastic Modulus of Foundry Silicate Binders. International Journal of Metalcasting, 2019, 1-9 mehr…
  • Leuning, Nora; Elfgen, Silas; Weiss, Hannes A.; Volk, Wolfram; Hameyer, Kay: Der Einfluss des Schneidens von Elektroblechlamellen und die geeignete numerische Modellierung. e & i Elektrotechnik und Informationstechnik 136 (2), 2019, 184-194 mehr…
  • Maier, D.; Hartmann, C.; Till, M.; Büdenbender, C.; Behrens, B.; Volk, W.: Data-Driven Compensation for Bulk Formed Parts Based on Material Point Tracking. Key Engineering Materials, 2019, 277-284 mehr…
  • Markus Welm, Philipp Tröber, Hannes Alois Weiss, Roland Golle, Wolfram Volk: Adhesive Wear Initiation during Blanking of Austenitic Stainless Steel, with regard to Thermoelectricity. Dry Metal Forming Open Access Journal, 2019 mehr…
  • Mittler, T.; Greß, T.; Feistle, M.; Krinninger, M.; Hofmann, U.; Riedle, J.; Golle, R.; Volk, W.: Fabrication and processing of metallurgically bonded copper bimetal sheets. Journal of Materials Processing Technology 263, 2019, 33-41 mehr…
  • Mittler, T.; Greß, T.; Volk, W.: Development of a Production Chain for Cu-bilayer Products. TMS 2019 Annual Meeting & Exhibition, 2019 mehr…
  • Neumayer, F.; Vogt, S.; Gueffroy, M.; Jesner, G.; Kelsch, R.; Geile, M; Sommer, A.; Golle, R.; Volk, W.: Warm and cold blanking of manganese-boron steel 22MnB5 with different tool geometries. Procedia Manufacturing 29, 2019, 345-352 mehr…
  • Norz, R.; Volk, W.: Investigation of non-proportional load paths by using a cruciform specimen in a conventional Nakajima test. International Deep Drawing Research Group 38th Annual Conference, 2019 mehr…
  • Opritescu, D.; Hartmann, C.; Riedl, W.; Ritter, M.; Volk, W.: Low-risk bypassing of machine failure scenarios in automotive industry press shops by releasing overall capacity of the production networks. Journal of Manufacturing Systems 52 / Part A , 2019, 121-130 mehr…
  • Scholz, M.; Thomann, F.; Moheit, L.; Greß, T.; Volk, W.; Marburg, S.: Jazz-Glocke: Sound Design, Strukturoptimierung und Guss. Fortschritte der Akustik-DAGA : 45. Jahrestagung für Akustik, 18.-21. März, DEGA e.V., 2019 mehr…
  • Stahl, J.; Müller, D.; Pätzold, I.; Golle, R.; Tobie, T.; Volk, W.; Stahl, K.: The Influence of Residual Stresses Induced by Near-Net-Shape Blanking Processes on the Fatigue Behavior under Bending Loads. IOP Conference Series: Materials Science and Engineering 651, 2019, 012086 mehr…
  • Tröber, P.; Welm, M.; Weiss, H.; Demmel, P; Golle, R.; Volk, W.: The influence of process parameters and sheet material on the temperature development in the forming zone. Manufacturing Review 6, 2019 mehr…
  • Vitzthum, S.; Hartmann, C.; Eder, M.; Volk, W.: Temperature-based determination of the onset of yielding using a new clip-on device for tensile tests. 18th International Conference on Sheet Metal, SHEMET, 2019, 490-497 mehr…
  • Vitzthum, S.; Hiller, M.; Volk, W.: Experimental investigation of the scalability of roller‐clinching processes with regard to joint strength and failure mode. Material Science & Engineering Technology 50 (8), 2019, 1015-1026 mehr…
  • Vitzthum, S.; Sturm, P.; Hiller, M.; Volk, W.: Numerical investigation on the robustness of the roller clinching process. AIP Conference Proceedings, 2019 mehr…
  • Vogt, S.; Greß, T.; Neumayer, F.; Schwarzer, N.; Harris, A.; Volk, W.: Method for highly spatially resolved determination of residual stress by using nanoindentation. Production Engineering 13 (2), 2019, 133-138 mehr…
  • Volk, W.; Eder, M.; Norz, R.; Vitzthum, S.: Determination and Validation of Material Parameters for Sheet Metal Simulation. 12th Forming Technology Forum, 2019 mehr…
  • Volk, W.; Groche, P.; Brosius, A.; Ghiotti, A.; Kinsey, B. L.; Liewald, M.; Madej, L.; Min, J.; Yanagimoto, J.: Models and Modelling for Process Limits in Metal Forming. CIRP Annals 68 (2), 2019, 775-798 mehr…
  • Volk, W.; Hammer, T.: Verschleißkurven von Schneidstempeln durch gezieltes Ermüden. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2019, mehr…
  • Volk, W.; Norz, R.; Eder, M.: Prediction and Validation of Forming Limits in Sheet Metal Forming with Non-Proportional Load Histories. 18th International Conference on Sheet Metal (SheMet 2019), 2019 mehr…
  • Volk, W.; Vogt, S.; Stahl, J.; Prauser, S.: Introduction to residual stresses in production technology. Production Engineering, 2019 mehr…
  • Weiss, H.A.; Steentjes, S.; Tröber, P.; Leuning, N.; Neuwirth, T.; Schulz, M.; Hameyer, K.; Golle, R.; Volk, W.: Neutron grating interferometry investigation of punching-related local magnetic property deteriorations in electrical steels. Journal of Magnetism and Magnetic Materials 474, 2019, 643-653 mehr…
  • Weiss, Hannes Alois; Leuning, Nora; Hameyer, Kay; Hoffmann, Hartmut; Volk, Wolfram: Manufacturing efficient electrical motors with a predictive maintenance approach. CIRP Annals 68 (1), 2019, 253-256 mehr…
  • Werner, M. K.; Maier, D.; Vitzthum, S.; Intra, C.; Volk, W.: Validation of numerical simulations for the reduced freeform bending process using a test bench. Production at the leading edge of technology - Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019, Springer Vieweg, 2019WGP Jahreskongress, 149-157 mehr…

2018

  • Benkert, T.; Hiller, M.; Volk, W.: A holistic approach to lightweight design of multi-component gearwheels. IOP Conference Series: Materials Science and Engineering 418, 2018, 012121 mehr…
  • Böttcher, O.; Gruber, M.; Raupach, M.; Volk, W.: Anbindungsoptimierung von Folgeverbundbauteilen. , Hrsg.: Europäische Forschungsgesellschaft für Blechverarbeitung e.V.: Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2018, mehr…
  • Eder, Matthias; Gaber, Christian; Nester, Winfried; Hoffmann, Hartmut; Volk, Wolfram: Innovative measurement technique to determine equibiaxial flow curves of sheet metals using a modified Nakajima test. CIRP Annals - Manufacturing Technology, Elsevier Ltd, 2018, 265–268 mehr…
  • Ettemeyer, F.; Steinlehner, F.; Lechner, P.; Volk, W.; Günther, D.: Detection of Core Fracture in Inorganically Bound Cast-in Sand Cores by Acoustic Microphony. Congress of the German Academic Association for Production Technology, 2018, 34-43 mehr…
  • Feistle, M.; Pätzold, I.; Golle, R.; Volk, W.; Frehn, A.; Ilskens, R.: Maximizing the Expansion Ratio through Multi-stage Shearcutting Process during Collar Forming. IOP Conf. Series: Materials Science and Engineering 418, 2018 mehr…
  • Greß, T.; Mittler, T.; Volk, W.: Casting methods for the production of rotationally symmetric copper compounds. Copper Alloys 2018, 2018 mehr…
  • Habibi, N.; Pütz, F.; Könemann, M.; Brinell, V.; Münsermann, S.; Feistle, M.; Volk, W.: Numerical quantification of damage accumulation resulting from blanking in multi-phase steel. IOP Conf. Series: Materials Science and Engineering 418, 2018 mehr…
  • Hartmann, C.; Eder, M.; Opritescu, D.; Maier, D.; Santaella, M.; Volk, W.: Geometrical compensation of deterministic deviations for part finishing in bulk forming. Journal of Materials Processing Technology 261, 2018, 140-148 mehr…
  • Hartmann, C.; Wang, J.; Opritescu, D.; Volk, W.: Implementation and evaluation of optical flow methods for two-dimensional deformation measurement in comparison to digital image correlation. Optics and Lasers in Engineering 107, 2018, 127-141 mehr…
  • Heilmeier, F.; Volk, W.: In-situ-Dehnungsmessung während der Erstarrung und Abkühlung von Aluminiumlegierungen mittels Faser-Bragg-Gitter. Leichtbau in Guss, 2018 mehr…
  • Hiller, M.; Vitzthum, S.; Hacker, M.; Benkert; T.; Volk, W.: Numerical Analysis of the Scalability of Roller Clinching Processes. Key Engineering Materials 767, 2018, 377-385 mehr…
  • Himmel, B.; Rumschoettel, D.; Volk, W.: Tensile properties of aluminium 4047A built in droplet-based metal printing. Rapid Prototyping Journal 25 (2), 2018, 427-432 mehr…
  • Himmel, B.; Rumschöttel, D.; Volk, W.: Thermal process simulation of droplet based metal printing with aluminium. Production Engineering 12 (3-4), 2018, 457-464 mehr…
  • Kawalla, R.; Stöcker, A.; Prahl, U.; Wei, X.; Dierdorf, J.; Hirt, G.; Heller, M.; Roggenbuck, S.; Korte-Kerzel, S.; Weiss, H. A.; Tröber, P.; Böhm, L.; Volk, W.; Leuning, N.; Hameyer, K.: Low-loss FeSi sheet for energy-efficient electrical drives. AIMS Materials Science, 2018 mehr…
  • Lechner, P.; Ettemeyer, F.; Volk, W.; Schneider, M.; Hofmann, T.; Andrä, H.: Mikrostrukturbasierte Vorhersage von Materialeigenschaften anorganischer Formstoffe. Formstoff-Forum, 2018 mehr…
  • Lechner, P.; Stahl, J.; Ettemeyer, F.; Himmel, B.; Tananau-Blumenschein, B.; Volk, W.: Fracture Statistics for Inorganically-Bound Core Materials. Materials (11), 2018, 1996-1944 mehr…
  • Lee, S.; Eder, M.; Maier, D.; Volk, W.: Stress-based compensation of geometrical deviations in metal forming. Advances in Production Research, 2018WGP 2018, 647-656 mehr…
  • Leuning, N.; Dierdorf, J.; Stöcker, A.; Kawalla, R.; Wei, X.; Dierdorf, J.; Roggenbuck, S.; Hirt, G.; Korte-Kerzel, S.; Weiss, H.; Volk, W.; Hameyer, K.: Impact of the interaction of material production and mechanical processing on the magnetic properties of non-oriented electrical steel. AIP Advances, 2018 mehr…
  • Linder, M.; Tunc, E.; Weraneck, K.; Heilmeier F.; Volk, W.; Jakobi, M.; Koch, A. W.; Roths, J.: Regenerated Bragg Grating Sensor Array for Temperature Measurements During an Aluminum Casting Process. IEEE SENSORS JOURNAL, 2018 mehr…
  • Mittler, T.; Greß, T.: Verbundstranggießen von Kupferwerkstoffen. 13. Bayerische Barbara-Tagung, 2018 mehr…
  • Mittler, T.; Greß, T.; Volk, W.: Stranggießen und umformtechnische Weiterverarbeitung von stoffschlüssig verbundenen Kupfer-Hybridhalbzeugen. 15. Kupfer-Symposium, 2018 mehr…
  • Mittler, T.; Greß, T.; Westerwick, J.; Honsel, C.; Hartmann, E.: Energie- und materialeffiziente Herstellung von Kupfer-Verbundhalbzeugen mittels Verbundgießen. Abschlussbericht 32334/01-21, 2018 mehr…
  • Paetzold, I.; Feistle, M.; Golle, R.; Volk, W.; Frehn, A.; Ilskens, R.: Determination of the minimum possible damage due to shear cutting using a multi-stage shear cutting process. International Deep Drawing Research Group 37th Annual Conference, 2018 mehr…
  • Pintore, M.; Starykov, O.; Mittler, T.; Volk, W.; Tonn, B.: Experimental investigations on the influence of the thermal conditions during composite casting on the microstructure of Cu-Al-bilayer-compounds. International Journal of Metalcasting 12 (1), 2018, 79-88 mehr…
  • Schmid, S.; Mittler, T.; Greß, T.; Volk, W.: Simulation des Verbundstranggießens von Kupferwerkstoffen im Bandformat. Große Gießereitechnische Tagung, 2018 mehr…
  • Schneider, M.; Hofmann, T.; Andrä, H.; Lechner, P.; Ettemeyer, F.; Volk, W.; Steeb, H.: Modelling the microstructure and computing effective elastic properties of sand core materials. International Journal of Solids and Structures, 2018 mehr…
  • Stahl J.: Effiziente Geometrievorhersage von Blechbauteilen mit Durchsetzungen. 10. Kongress Stanztechnik, 2018 mehr…
  • Stahl, J.; Müller, D.; Tobie, T.; Golle, R.; Volk, W.; Stahl, K.: Residual Stresses in Parts Manufactured by Near-Net-Shape-Blanking. Production Engineering – Research and Development, 2018 mehr…
  • Tekkaya, E.; Gutknecht, F.; Steinbach, F.; Volk, W.; Neumayer, F.; Hammer, T.; Cha, W.; Groche, P.; Übelacker, D.; Stein, P.: Trockenscherschneiden von metallischen Schichtverbundwerkstoffen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2018 mehr…
  • Tröber, P.; Welm, M.; Weiss, H. A.; Demmel, P.; Golle, R.; Volk, W.: Einfluss verschiedener Prozessparameter auf die Temperaturentwicklung in der Umformzone beim Durchsetzen von Vergütungsstahl. Dry Metal Forming Open Access Journal 4, 2018, 47-51 mehr…
  • Tröber, P.; Welm, M.; Weiss, H. A.; Demmel, P.; Golle, R.; Volk, W.: The influence of process parameters on the temperature development in the forming zone. MATEC Web of Conferences (190), 2018 mehr…
  • Vitzthum, S.; Eder, M.; Hartmann, C; Volk, W.: Investigation on strain dependent elastic behavior for accurate springback analysis. Journal of Physics: Conference Series Volume 1063, 2018 mehr…
  • Vitzthum, S.; Hiller, M.; Dinh, D. T.; Volk, W.: Tool setup to investigate scalability of roller clinching processes. Procedia Manufacturing Volume 15, 2018, 1338-1345 mehr…
  • Vogt, S.; Neuwirth, T.; Schauerte, B.; Weiss, H. A.; Falger, P. M.; Gustschin, A.; Schulz, M.; Hameyer, K.; Volk, W.: Extent of embossing-related residual stress on the magnetic properties evaluated using neutron grating interferometry and single sheet test. Production Engineering, 2018 mehr…
  • Vogt, Simon; Neuwirth, Tobias; Schauerte, Benedikt; Weiss, Hannes Alois; Falger, Peter Markus; Gustschin, Alex; Schulz, Michael; Hameyer, Kay; Volk, Wolfram: Extent of embossing-related residual stress on the magnetic properties evaluated using neutron grating interferometry and single sheet test. Production Engineering 13 (2), 2018, 211-217 mehr…
  • Volk, W.; Eder, M.; Norz, R.; Vitzthum, S.: Advanced Strategies for Material Characterization and Validation in Sheet Metal Forming. Asia-Pacific Symposium on Engineering Plasticity and its Applications (AEPA2018), 2018 mehr…
  • Volk, W.; Kindsmüller, A.; Pätzold, I.; Stahl, J.: Ursache und Vorhersage von hochkommenden Stanzbutzen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., EFB-Forschungsbericht, 2018, mehr…
  • Volk, W.; Krinninger, M.; Stahl, J.: Inverse Calibration of a Shear Cutting Simulation and Investigation of Various Shear Cutting Parameters. Forming Technology Forum 2018, 2018 mehr…

2017

  • Baumgartner, G.; Koos, R.; Volk, W.: Verhalten einer AISi9-Mikrostruktur unter Last und Berechnung der mechanischen Eigenschaften auf Basis der Mikrostruktur. Metall, 2017, 185-192 mehr…
  • Benkert, T.; Hiller, M.; Volk, W.: Multi-component lightweight gearwheels with deep-drawn wheel body for automotive applications. Journal of Physics: Conference Series 896, 2017, 012083 mehr…
  • Beulich, N.; Craighero, P.; Volk, W.: FEA Simulation of Free-Bending – a Preforming Step in the Hydroforming Process Chain. Journal of Physics: Conference Series 896, 2017, 012063 mehr…
  • Cha, W.-G.; Müller, S.; Bursac, N; Albers, A.; Volk, W: Influence of process parameters on the formability of bead stamping part using advanced models. Korea-Workshop, Sogang University (Seoul); KAIST (Daejeon), 2017 mehr…
  • Cha, W.; Hammer, T.; Gutknecht, F.; Golle, R.; Tekkaya, A. E.; Volk, W.: Adaptive Wear Model for Shear-Cutting Simulation with Open Cutting Line. Wear 386-387, 2017, 17-28 mehr…
  • Cha, W.; Müller, S.; Bursac, N.; Albers, A.; Volk, W.: Influence of process parameters on the formability of bead stamping part using advanced models. Journal of Physics: Conference Series 896, 2017, 012005 mehr…
  • Eder, M.; Hartmann, C.; Volk, W.: Geometriebasierte prozessbegleitende Abweichungskompensation. massivUMFORMUNG, 2017, 66-71 mehr…
  • Eder, M.; Volk, W.: Determination of Beginning Shear Band Formation using the Acoustic Tensor. 67th CIRP General Assembly, 2017 mehr…
  • Feistle, M.; Koslow, I.; Krinninger, M.; Golle, R.; Volk, W.: Reduction of burr formation for conventional shear cutting of boron-alloyed sheets through focused heat treatment. Procedia CIRP 63C (2017), 2017, 493-498 mehr…
  • Feistle, M.; Krinninger, M.; Pätzold, I.; Stahl, J.; Golle, R.; Volk, W.: Design and conceptualization of a cutting tool to investigate the influence of the shear cutting process on edge crack sensitivity. 36th IDDRG Conference Materials Modelling and Testing for Sheet Metal Forming, Journal of Physics, 2017 mehr…
  • Gläsner, T.; Sunderkötter, C.; Hoffmann, H.; Volk, W.; Golle, R.: Development of a 2-stage shear-cutting-process to reduce cut-edge-sensitivity of steels. Journal of Physics: Conference Series 896, 2017, 012104 mehr…
  • Gritzmann, P.; Opritescu, O.; Ritter, M.; Schmiedl, F.; Volk, W.: A knowledge-based automated driving approach for flexible production of individualized sheet metal parts. IEEE Trans. Automation Sci. and Eng. , 2017 mehr…
  • Hameyer, K.; Leuning, N.; Steentjes, S.; Stöcker, A.; Kawall, R.; Wei, X.; Dierdorf, J.; Hirt, G.; Roggenbuck, S.; Korte-Korzel, S.; Weiss, H.; Volk, W.: Impact of the Interaction of Material Production and Mechanical Processing on the Magnetic Properties of Non-oriented Electrical Steel. 23rd Soft Magnetic Materials Conference, SMM 2017, 2017 mehr…
  • Hartmann, C.; Eder, M.; Opritescu D.; Volk, W.: Process-integrated Compensation of Geometrical Deviations for Bulk Forming. International Conference on the Technology of Plasticity, Elsevier, 2017, 466-471 mehr…
  • Hartmann, C.; Volk, W.: Individualized sheet metal part manufacturing by an incremental free-forming process. Korea-Workshop, Sogang University (Seoul); KAIST (Daejeon), 2017 mehr…
  • Hautsch, S.; Heilmeier, F.: Effiziente Entwicklung von prozessoptimalen Druckgussbauteilen durch Kombination von Topologieoptimierung und Prozesssimulation. STUTTGARTER SYMPOSIUM FÜR PRODUKTENTWICKLUNG SSP 2017, 2017 mehr…
  • Hiller, M.; Benkert, T.; Vitzthum, S.; Volk, W.: Influence of tool elasticity on process forces and joint properties during clinching with rotational tool movement. Journal of Physics: Conference Series 896, 2017, 012116 mehr…
  • Himmel, B.; Volk, W.: Inkrementelles Gießen – Direkter Metalldruck mit Aluminium. Leichtbau in Guss, 2017 mehr…
  • Kaiser, C.; Roll, K.; Volk, W.: Increasing the efficiency of designing hemming processes by using an element-based metamodel approach. Journal of Physics: Conference Series 896, 2017, 012041 mehr…
  • Kopp, T.; Tröber, P.; Weiss, H.: Auswirkungen der Werkzeugsteifigkeit auf den Stanzprozess. Branchentreff Stanzwerkzeugbau, 2017 mehr…
  • Krinninger M.; Opritescu D.; Golle R.; Volk W.: Reduzierung der Flitterentstehung beim Scherschneiden von Aluminiumblechen. In: Energie / Effiziente Verarbeitung zukunftsweisender LeichtbauWerkstoffe. Druck und Verarbeitung: Druckteam GmbH , 2017, 273-290 mehr…
  • Krinninger, M.; Feistle, M.; Golle, R.; Volk, W.: Notch Shear Cutting of Aluminium Alloys. 17th International Conference on Sheet Metal, SHEMET17, 2017, 53-58 mehr…
  • Krinninger, M.; Opritescu, D.; Golle, R.; Volk, W.: On the opportunities of problem- and process-adapted shear cutting simulations for effective process design. International Conference on the Technology of Plasticity, 2017 mehr…
  • Krinninger, M.; Steinlehner, F.; Opritescu, D.; Golle, R.; Volk, W.: On the Influence of Different Parameters on the Characteristic Cutting Surface when Shear Cutting Aluminum. Procedia CIRP , 2017, 230-236 mehr…
  • Krinninger, Michael; Steinlehner, Florian; Opritescu, Daniel; Golle, Roland; Volk, Wolfram: On the Influence of Different Parameters on the Characteristic Cutting Surface when Shear Cutting Aluminum. Procedia CIRP 63, 2017, 230-235 mehr…
  • Maier, S.; Schmerbeck, T.; Liebig, A.; Kautz, T.; Volk, W.: Potentials for the use of tool-integrated in-line data acquisition systems in press shops. Journal of Physics: Conference Series 896, 2017, 012033 mehr…
  • Meissner, R.; Benkert, T.; Hiller, M.; Liewald, M.; Volk, W.: Manufacturing processes of multi-component gearwheels. Forschung im Ingenieurwesen (2-3), 2017, 265-269 mehr…
  • Meissner, R.; Benkert, T.; Hiller, M.; Liewald, M.; Volk, W.: Manufacturing processes of multi-component gearwheels. Forschung im Ingenieurwesen 81 (2-3), 2017, 265-269 mehr…
  • Meissner, R.; Benkert, T.; Liewald, M.; Volk, W.: Lightweight gearwheel design using separate gear ring and wheel body - Part II: Different manufacturing concepts for replacing a full body gearwheel. Steels in Cars and Trucks 2017, 2017 mehr…
  • Mittler, T.; Greß, T.; Pintore, M.; Volk, W.: Continuous casting of copper compounds. Metall, 2017, 459-462 mehr…
  • Mittler, T.; Greß, T.; Volk, W.: Horizontales Verbundstranggießen von Kupferwerkstoffen. 14. Kupfer-Symposium, 2017 mehr…
  • Pätzold I.; Feistle M.; Golle R.; Hoffmann H.; Volk W.; Frehn A.; Ilskens R.: Identification of Edge Crack Sensitivity on Shear Cut Component Edges made of High-Strength Materials using suitable Testing Methods. 5th International Conference on Steel in Cars and Trucks, 2017 mehr…
  • Pätzold, I.; Dittmann, F.; Feistle, M.; Golle, R.; Hoffmann, H.; Volk, W.: Influence of shear cutting parameters on the fatigue behavior of a dual-phase steel. 36th IDDRG Conference Materials Modelling and Testing for Sheet Metal Forming, Journal of Physics, 2017 mehr…
  • Raupach, M.; Kreissl, S.; Vuaille, L.; Möller, T.; Friebe, H.; Volk, W.: Mesh refinement study and experimental validation for stretch bending of sheet metals. Journal of Physics: Conference Series 896, 2017, 012071 mehr…
  • Rumschoettel, D.; Griebel, B.; Irlinger, F.; Lueth, T. C.: A fast pneumatic droplet generator for the ejection of molten aluminum. 2017 Pan Pacific Microelectronics Symposium, 2017 mehr…
  • Stahl, J.; Tröber, P.; Feistle, M.; Golle, R.; Volk, W.: An inverse approach for the geometry prediction of sheetmetal. 36th IDDRG Conference Materials Modelling and Testing for Sheet Metal Forming, 2017 mehr…
  • Starykov,O.; Wölck,J.; Pintore,M.; Tonn,B.; Volk,W.: Development and validation of a numerical model for intermetallic layer growth during composite casting of Cu-Al-compounds. Proceedings of the 6th Decennial International Conference on Solidification Processing, Brunel University, 2017 mehr…
  • Tröber, P.; Demmel, P.; Hoffmann, H.; Golle, R.; Volk, W.: On the influence of Seebeck coefficients on adhesive tool wear during sheet metal processing. Lehrstuhl für Umformtechnik und Gießereiwesen, 2017, mehr…
  • Tröber, P.; Demmel, P.; Weiss, H.A.; Golle, R.; Volk, W.: In-situ Temperaturmessung beim schmierstofffreien Durchsetzen von Vergütungsstahl. Lehrstuhl für Umformtechnik und Gießereiwesen, 2017, mehr…
  • Tröber, P.; Weiss, H.A.; Kopp, T.; Golle, R; Volk, W.: On the correlation between thermoelectricity and adhesive tool wear during blanking of aluminum sheets. Lehrstuhl für Umformtechnik und Gießereiwesen, 2017, mehr…
  • Vitzthum, S. J.; Hartmann, C.; Weiss, H. A.; Baumgartner, G.; Hofmann, M.; Volk, W.: Determination of crystallographic young’s modulus for sheet metals by in situ neutron diffraction. Journal of Physics: Conference Series 896, 2017, 012123 mehr…
  • Vogt, S.; Neumayer, F.; Serkyov, I.; Jesner, G.; Kelsch, R.; Geile, M.; Sommer, A.; Golle, R.; Volk, W.: Experimental evaluation of tool wear throughout a continuous stroke blanking process of quenched 22MnB5 ultra-high-strength steel. 36th IDDRG Conference Materials Modelling and Testing for Sheet Metal Forming, 2017 mehr…
  • Volk W.; Weinschenk A.; Hartmann C.; Eder M.: New Strategy for Prevention and Compensation of Springback for Metal Forming Applications. HxGN LIVE 2017, 2017 mehr…
  • Volk, W.; Baumgartner, G.; Lechner, P.; Ettemeyer, F.: Prognose von Werkstoffeigenschaften mit Hilfe einer Mikrostrukturanalyse im Bereich des Kokillengusses und anorganischer Formstoffe. Deutscher Gießereitag, 2017 mehr…
  • Volk, W.; Eder, M.; Feistle, M.; Gaber, C.; Jocham, D.; Pätzold, I.; Vitzthum, S.; Weinschenk, A.: Advances in Characterization of Sheet Metal Materials. 36th IDDRG Conference Materials Modelling and Testing for Sheet Metal Forming, 2017 mehr…
  • Volk, W.; Eder, M.; Feistle, M.; Pätzold. I: Vorstellung des Lehrstuhls für Umformtechnik und Gießereiwesen und mögliche Forschungsschwerpunkte für die Federnindusitrie. VDFI-Mitgliederversammlung, 2017 mehr…
  • Volk, W.; Gaber, C.: Investigation and Compensation of Biaxial Pre-strain During the Standard Nakajima- and Marciniak-test Using Generalized Forming Limit Concept. Procedia Engineering 207, 2017, 568-573 mehr…
  • Volk, W.; Hartmann, C.; Hiller, M.; Opritescu, D.; Weinschenk, A.; Feistle, M.; Krinninger, M.: Umformen und Schneiden von Blechbauteilen – 5-1. In: Handbuch Stahl: Auswahl, Verarbeitung, Anwendung. Carl Hanser Verlag, 2017, 105-129 mehr…
  • Volk, W.; Hiller, M.; Maier, S.: Chances and Limitations of In-Line Measurement for Automotive Press Shops. 10thForming Technology Forum: Model Based Control for Smart Forming Processes, 2017 mehr…
  • Volk, W; Feistle, M.; Gaber, C.; Hammer, T.; Heilmeier, F.; Jocham, D.; Kopp, T.; Stahl, J.; Weinschenk, A.: Material testing and process control: Anachronism or future challenge for the German automotive industry with respect to industry 4.0? Proceedings of the 8th Zwick Academia Day 2017, 2017 mehr…
  • Weinschenk, A.; Schrepfer, A.; Volk, W.: Experimental Validation of Detecting Surface Deflections on Sheet Metal Parts with LS-Dyna. 11th European LS-DYNA Conference, 2017 mehr…
  • Weinschenk, A.; Volk, W.: Prevention of Surface Deflections. CIRP 2017Lugano, Schweiz; 20.-26.08.2017 mehr…
  • Weinschenk, A.; Volk, W.: Strategy to prevent surface deflections for automotive sheet metal parts. Journal of Physics: Conference Series 896, 2017, 012058 mehr…
  • Weinschenk, A.; Volk, W.: FEA-based Development of a New Tool for Systematic Experimental Validation of Nonlinear Strain Paths and Design of Test Specimens. 20th International ESAFORM Conference on Material Forming, 2017 mehr…
  • Weiss, H. A.; Tröber, P.; Golle, R.; Steentjes, S.; Leuning, N.; Hameyer, K.; Volk, W.: Loss reduction due to blanking parameter optimization for different non-grain oriented electrical steel grades. Electric Machines and Drives Conference (IEMDC), 2017 IEEE International, 2017 mehr…
  • Weiss, H. A.; Vogt, S.; Backs, A.; Neuwirth, T.; Steentjes, S.; Leuning, N.; Schulz, P.; Volk, W.; Hameyer, K.; Böni, P.: Targeted Local Stress Imprint in Electrical Steel as Means of Improving the Energy Efficiency. 4th Conference on X-ray and Neutron Phase Imaging with Gratings 2017 mehr…
  • Weiss, H.; Golle, R.; Hoffmann, H.; Volk, W.: Auswirkung des Stanzprozesses auf den Wirkungsgrad von Elektromotoren. 9. Kongress Stanztechnik, 2017 mehr…
  • Zgoll, F.; Götze, T.; Volk, W.: Building a substitute model of a bolster based on experimentally determined deflection. Journal of Physics: Conference Series 896, 2017, 012044 mehr…

2016

  • Benkert, T.; Volk, W.: Deep Drawing of Gear Wheel Bodies. International Cold Forging Group Plenary Meeting, 2016, 141-143 mehr…
  • Cha, W.-G.; Vogel, S.; Bursac, N.; Albers, A.; Volk, W.: Determination of the bead geometry considering formability and stiffness effect using generalized forming limit concept (GFLC). Journal of Physics: Conference Series 734, 2016, 32077 mehr…
  • Feistle M.; Pätzold I.; Weinschenk A.; Volk W.: Neues Verfahren zur Bestimmung der Kantenrissempfindlichkeit in der Blechumformung. 25. testXpo - Internationale Fachmesse für Prüftechnik, 2016 mehr…
  • Feistle, M.; Golle, R.; Volk, W.: Determining the influence of shear cutting parameters on the edge cracking susceptibility of high-strength-steels using the edge-fracture-tensile-test. 48th CIRP Conference on Manufacturing Ssystems - CIRP CMS 2015, 2016 mehr…
  • Feistle, M.; Pätzold, I.; Golle, R.; Volk, W.: Predicting Edge Cracks on Shear-Cut High-Strength Steels by Modified Uniaxial Tensile Tests. Journal of Key Engineering Materials Vol. 703, 2016, 49-55 mehr…
  • Gaber, C.; Jocham, D.; Weiss, H. A.; Böttcher, O.; Volk, W.: Evaluation of non-linear strain paths using Generalized Forming Limit Concept and a modification of the Time Dependent Evaluation Method. International Journal of Material Forming, 2016 mehr…
  • Greß, T.: Herstellung und mechanische Prüfung von rotationssymmetrischen Verbundgusshalbzeugen. Deutscher Gießereitag 2016, 2016Magdeburg, 14.04.2016-15.04.2016 mehr…
  • Griebel, B.; Brecheisen, D.; Ramakrishnan, R.; Volk W.: Optical Measurement Techniques Determine Young's Modulus of Sand Core Materials. International Journal of Metalcasting 10 (4), 2016, 524-530 mehr…
  • Griebel, Benjamin; Ramakrishnan, Robert; Volk, Wolfram; Baibl, Dominik; Nürnberger, Frank: Projektbericht: Einflussanalyse anorganisch gebundener Formstoffe. 1. Internationales Deutsches Formstoff-Forum 2016, VDG, 2016, 47-53 mehr…
  • Gutknecht, F.; Steinbach, F.; Hammer, T.; Clausmeyer, T.; Volk, W.; Tekkaya A. E.: Analysis of shear cutting of dual phase steel by application of an advanced damage model. 21st European Conference on Fracture, 2016, 1700-1707 mehr…
  • Hammer, T.; Cha, W.-G.; Feistle, M.; Golle, R.; Volk, W.: FE-unterstützte Verschleißprognose beim Scherschneiden unter Berücksichtigung verschiedener Verschleißmechanismen. 9. Forum Tribologische Entwicklungen in der Blechumformtechnik, Meisenbach Verlag GmbH, 2016, 59-71 mehr…
  • Heilmeier, F.; Goller, D.; Opritescu, D.; Thoma, C.; Rieg, F.; Volk, W.: Support for Ingate Design by Analysing the Geometry of High Pressure Die Cast Geometries Using Dijkstra’s Shortest Path Algorithm. Advanced Materials Research 1140, 2016, 400-407 mehr…
  • Heilmeier, F.; Volk, W.: Prozessgerechte Gestaltung von Druckgussbauteilen. Leichtbau in Guss, 2016 mehr…
  • Heugenhauser, S.; Kaschnitz, E.; Mittler, T.; Pintore, M.; Schumacher, P.: Development and Numerical Simulation of A Compound Belt Casting Process. In: The Minerals, Metals and Materials Society (Hrsg.): Light Metals 2016. Wiley-Blackwell, 2016 mehr…
  • Hiller, M.; Volk, W.: Joining by Plastic Deformation: Overview of the DFG Priority Program 1640. Advanced Multimaterial Structures in the Automotive Industry, 2016 mehr…
  • Jocham, D.; Gaber, C.; Böttcher, O.; Wiedemann, P.; Volk, W.: Experimental prediction of sheet metal formability of AW-5754 for non-linear strain paths by using a cruciform specimen and a blank holder with adjustable draw beads on a sheet metal testing machine. International Journal of Material Forming, 2016 mehr…
  • Jocham, D.; Norz, R.; Volk, W.: Strain rate sensitivity of DC06 for high strains under biaxial stress in hydraulic bulge test and under uniaxial stress in tensile test. International Journal of Material Forming, 2016 mehr…
  • Jocham, D.; Vitzthum, S.; Takahashi, S.; Weinschenk, A.; Volk, W.: Yield locus determination of DX56 on a testing apparatus with link mechanism using thermoelectrical effect and equivalent plastic work. 9th Forming Technology Forum 2016, 2016, 81-86 mehr…
  • Jocham, D.; Volk, W.: Numerical determination of the onset of local necking using time dependent evaluation method and dynamic material parameters. J. Phys.: Conf. Ser. 734 032015 734, 2016, 032015 mehr…
  • Kopp, T.; Stahl, J.; Demmel, P.; Tröber, P.; Golle, R.; Hoffmann, H.; Volk, W.: Experimental investigation of the lateral forces during shear cutting with an open cutting line. Journal of Materials Processing Technologiy Volume 238, 2016, 49-54 mehr…
  • Krinninger, M.; Opritescu, D.; Golle, R.; Volk, W.: Experimental investigation of the influence of punch velocity on the springback behaviour and the flat length in free bending. Procedia CIRP  41, 2016, 1066-1071 mehr…
  • Leuning, N.; Steentjes, S.; Weiss, H.; Volk, W.; Hameyer, K.: On the Magneto-Elastic Behavior of Non-Oriented Electrical Steel Sheets and its Modeling, Advances in Multi-Scale Methods and Homogenization for Laminates and Windings in Magnetic Fields. MSHOW'16, 2016 mehr…
  • Maaß, L.; Donath, N.; Volk, W.; Hoffmann, H.: Influence of process-related oxide formation during shaping of aluminum fiber mats in the mushy state. Prod. Eng. Res. Devel. 10, 2016, 227-240 mehr…
  • Mittler, T.; Greß, T.; Pintore, M.; Volk, W.: Kupfer-Hybridhalbzeuge: Gießtechnische Herstellung eines rotationssymmetrischen Schichtverbundes. Metall, 2016, 248-251 mehr…
  • Opritescu, D.; Hartmann, C.; Volk, W.: Efficient parameterized characterization of manufacturing strategies for automated copied driving. Procedia CIRP  41, 2016, 1090-1095 mehr…
  • Opritescu, D.; Volk, W.: Variation of components by automated driving - A knowledge-based approach for geometric variance. International Journal of Material Forming  9, 2016, 9-19 mehr…
  • Risch, F.; Schilp, H.; Schlag, P.; Beckmöller, S.; Kehl, N.; Halder, H.; Rösler, C.; Schuster, C.; Amesöder, S.; Bickel, B.; Schneider, M.; Vogt, S.; Lingauer, A.: Hochflexible Produktionssysteme für effizienzgesteigerte E-Traktionsantriebe (HeP-E). Bundesministerium für Bildung und Forschung, TiB (Hannover) , 2016, mehr…
  • Saal, P.; Meier, L.; Li, X.; Hofmann, M.; Hoelzel, M.; Wagner, J. N.; Volk, W.: In Situ Study of the Influence of Nickel on the Phase Transformation Kinetics in Austempered Ductile Iron. Metallurgical and Materials Transactions A 47 (2), 2016, 661-671 mehr…
  • Steentjes, S.; Leuning, N.; Dierdorf, J.; Wei, X.; Weiss, H. A.; Volk, W.; Roggenbuck, S.; Korte-Kerzel, S.; Stoecker, A.; Kawalla, R.; Hameyer, K.: Effect of the Interdependence of Cold Rolling Strategies and Subsequent Punching on Magnetic Properties of NO Steel Sheets. IEEE Transactions on Magnetics, 2016 mehr…
  • Suh, J.; Victoria-Hernández, J.; Letzig, D.; Golle, R.; Volk, W.: Enhanced mechanical behavior and reduced mechanical anisotropy of AZ31 Mg alloy sheet processed by ECAP. Materials Science and Engineering: A 650, 2016, 523-529 mehr…
  • Suh, J.; Victoria-Hernández, J.; Letzig, D.; Golle, R.; Volk, W.: Effect of processing route on texture and cold formability of AZ31 Mg alloy sheets processed by ECAP. Materials Science and Engineering: A 669, 2016, 159-170 mehr…
  • Tröber, P.; Golle, R.; Volk, W.: Experimental investigation on the thermoelectric current during embossing of Aluminum EN AW 1050. Dry Metal Forming Open Access Journal FMT 2, 2016, 40-43 mehr…
  • Victoria-Hernández, J.; Suh, J.; Yi, S.; Bohlen, J.; Volk, W.; Letzig, D.: Strain-induced selective grain growth in AZ31 Mg alloy sheet deformed by equal channel angular pressing. Materials Characterization 113, 2016, 98-107 mehr…
  • Volk, W.; Griebel, B.; Ettemeyer, F.; Fehlbier M.; Reiche, L.; Hartmann, D.; Kallien L. H.; Winkler, M.: Trends und Herausforderungen für die deutsche Gießerei-Industrie aus Sicht der akademischen Forschung. GIESSEREI-SPECIAL 01/2016, 2016 mehr…
  • Volk, W.; Griebel, B.; Ettemeyer, F.; Fehlbier M.; Reiche, L.; Hartmann, D.; Kallien L. H.; Winkler, M.: Trends und Herausforderungen für die deutsche Gießerei-Industrie aus Sicht der akademischen Forschung. Deutscher Gießereitag 2016, 2016 mehr…
  • Volk, W.; Hartmann, C.; Feistle, M.; Gaber, C.; Jocham, D.; Weiss, H. A.: Advanced Methods in Sheet Metal Testing - Material Characterization and Prediction of Local Properties. Advanced Methods in Material Testing for Sheet Metal Forming, Institute of Metal Forming and Casting, Technical University of Munich , 20169th Forming Technology Forum 2016 , 3-8 mehr…
  • Volk, W.; Kopp, T.: Einfluss prozessbedingter Schneidspaltveränderungen auf den Werkzeugverschleiß. , Hrsg.: Europäische Forschungsgesellschaft für Blechverarbeitung e.V.: Europäische Forschungsgesellschaft für Blechverarbeitung e.V., Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (Hannover) , (EFB-Forschungsbericht 419), 2016, mehr…
  • Volk, W.; Sachnik, P.; Stahl, J.: Challenges and Chances of the Shear Cutting Simulation. The International Deep Drawing Research Group, 2016 mehr…
  • Weinschenk, A.; Volk, W.: Systematic investigation of geometrical parameters’ influence on the appearance of surface deflections in sheet metal forming. J. Phys.: Conf. Ser. 734, 2016, 032004 mehr…
  • Weiss, H. A.; Leuning, N.; Steentjes, S.; Hameyer, K.; Andorfer, T.; Jenner, S.; Volk, W.: Influence of shear cutting parameters on the electromagnetic properties of non-oriented electrical steel sheets. Journal of Magnetism and Magnetic Materials Volume 421, 2016, 250-259 mehr…
  • Weraneck, K.; Heilmeier, F.; Lindner, M.; Graf, M.A.; Jakobi, M.; Volk, W.; Roths, J.; Koch, A.W.: Strain Measurement in Aluminium Alloy during the Solidification Process Using Embedded Fibre Bragg Gratings. Sensors 16 (11), 2016, 1853 mehr…

2015

  • Baumgartner, G.; Andrä, H.; Weiß, K.; Schöbel, M.; Gerth, S.; Nerl, C.; Volk, W.: Festigkeitsberechnung in der Gießsimulation mit Hilfe eines µ-FE-Modells. Gießtechnik im Motorenbau, VDI, 2015 mehr…
  • Benkert, T.; Krinner, A.; Thümmel, T.; Volk, W.: Designing a High-Speed Press with a Six-Bar Linkage Mechanism. Applied Mechanics and Materials 794, 2015, 411-418 mehr…
  • Benkert, T.; Volk, W.; Krinner, A.; Blas, S.: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (Hrsg.): Mechanische Schnellläuferpresse mit Koppelrastgetriebe. EFB-Forschungsbericht 407. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2015 mehr…
  • Demmel, P.; Hoffmann, H.; Golle, R.; Intra, C.; Volk, W.: Interaction of heat generation and material behaviour in sheet metal blanking. CIRP Annals - Manufacturing Technology 64 (1), 2015, 249-252 mehr…
  • Feistle M., Krinninger M., Pätzold I., Volk W.: Edge-Fracture-Tensile-Test. In: A. Erman Tekkaya, Werner Homberg, Alexander Brosius (Hrsg.): 60 Excellent Inventions in Metal Forming. Springer Vieweg (1. Aufl.), 2015, 193-198 mehr…
  • Feistle M.; Volk W.: Edge-fracture-tensile-test. 2015 mehr…
  • Feistle, M.; Krinninger, M.; Golle, R.; Volk, W.;: Notch Shear Cutting of Press Hardened Steels. Journal of Key Engineering Materials Vol. 639, 2015, 477-484 mehr…
  • Feistle, M.; Volk W.: Edge-fracture-tensile-test. 24. testXpo - Internationale Fachmesse für Prüftechnik, 2015 mehr…
  • Gläsner, T.; Schaffner, T.; Sunderkötter, C.; Volk, W.; Hoffmann, H.; Golle, R.: Studies on the effect of tool wear on the production process in two stage shear cutting. Key Engineering Materials 651-653, 2015, 1261-1270 mehr…
  • Groche, P.; Stein, P.; Übelacker, D.; Neumayer, F.; Steinbach, F.: Trockenscherschneiden von Verbundblechen Einflussgrößen auf die Schnittflächengeometrie. wt Werkstattstechnik online Jahrgang 105, 2015, 799-737 mehr…
  • Hiller, Maria; Volk, Wolfram: Joining Aluminium Alloy and Mild Steel Sheets by Roller Clinching. Applied Mechanics and Materials 794, 2015, 295-303 mehr…
  • Jocham, D.; Baumann, M.; Volk, W.: Optimierung einer Probenform für den Kreuzzugversuch zur Bestimmung der Grenzformänderung. Material Testing, Carl Hanser Verlag GmbH & Co. Kg, 2015, 205-214 mehr…
  • Jocham, D.; Gaber, C.; Böttcher, O.; Volk, W.: Prediction of formability for multi-linear strain paths. Advanced constitutive models in sheet metal forming, 2015, 59-64 mehr…
  • Kaiser, C.; Zubeil, M.; Roll, K.; Volk, W.: New diagnostic techniques for an automated hemming validation of hang-on parts. Key Engineering Materials 639, 2015, 509-516 mehr…
  • Kaiser, C.; Zubeil, M.; Roll, K.; Volk, W.: New Diagnostic Techniques for an Automated Hemming Validation of Hang-On Parts. Key Engineering Materials, 2015, 509-516 mehr…
  • Kleser, M. A.; Benkert, T.: Nummerische Simulation einer Schnellläuferpresse unter Verwendung der FEM. , Hrsg.: Technische Universität München: Lehrstuhl für Umformtechnik und Gießereiwesen, mediaTUM (München) , (utg Technical Report 201501), 2015, mehr…
  • Kopp, T.; Golle, R.; Hoffmann, H.; Volk, W.: Einfluss der Werkzeugsteifigkeit auf die Standmenge von Stanzwerkzeugen. 7. Kongress Stanztechnik, 2015 mehr…
  • Krinninger M.: Die Rückfederung beim Blechbiegen im Fokus. Welt der Fertigung, 2015 mehr…
  • Letzig, D.; Suh, J.; Bohlen, J.; Yi, S.; Kurz, G.; Golle, R.; Volk, W.; Victoria-Hernandez, J.: On the Development of Mg Sheets with Improved Formability by Applying Additional Shear Strain during Processing. Material Science Forum, 2015, 395-400 mehr…
  • Leuning, N.; Steentjes, S.; Dierdorf, J.; Wei, X.; Hirt, G.; Weiss, H.; Volk, W.; Roggenbuck, S.; Korte-Kerzel, S.; Stöcker, A.; Kawalla, R.; Hameyer, K.: Continuous Process Chain Modeling of low-loss FeSi Sheet for Energy-efficient Electrical Drives. International Compumag Society (Volume 22, Number 3), 2015 mehr…
  • Li, X.; Saal, P.; Gan, W.; Hölzel, M.; Hofmann, M.: Strain induced martensitic transformation in austempered ductile iron (ADI). 12th International Conference on the Mechanical Behavior of Materials 2015 mehr…
  • Li, X.; Saal, P.; Hofmann, M.; Landesberger, M.; Hoelzel, M.: Strain Induced Martensitic Transformation in Austempered Ductile Iron (ADI). European Conference on Neutron Scattering (ECNS) 2015 mehr…
  • Mackensen, A.; Golle, M.; Golle, R.; Hoffmann, H.: Force reduction during blanking operations of AHSS sheet materials. In: Tekkaya, A. E.; Homberg, W.; Brosius, A. (Hrsg.): 60 Excellent inventions in metal forming. Springer, 2015, 205-210 mehr…
  • Opritescu, D.; Volk, W.: Automated driving for individualized sheet metal part production - A neural network approach. Robotics and Computer-Integrated Manufacturing 35, 2015, 144-150 mehr…
  • Saal, P.: Die Phasenumwandlungskinetik in ADI: Eigenschaftsprognose durch Neutronendiffraktometrie. Leichtbau in Guss, 2015 mehr…
  • Schrötzlmair, F.; Müller, M.; Pongratz, T.; Eder, M.; Johnson, T.; Vogeser, M.; von Holzschuher, V.; Zengel, P.; Sroka, R.: Laser lithotripsy of salivary stones: Correlation with physical and radiological parameters. Lasers in Surgery and Medicine 47 (4), 2015, 342-349 mehr…
  • Suh, J.; Victoria-Hernandez, J.; Letzig, D.; Golle, R.; Yi, S.; Bohlen, J.; Volk, W.: Improvement in cold formability of AZ31 magnesium alloy sheets processed by equal channel angular pressing. Journal of Materials Processing Technology 217, 2015, 286-293 mehr…
  • Tröber P.; Golle R.; Volk W.; :: Influence of lubrication on the measured thermoelectric voltage and temperature in the forming zone when embossing S355MC. Dry Metal Forming Open Access Journal FMT 1, 2015 mehr…
  • Tröber P.; Golle R.; Volk W.; :: Thermoelectric currents and their impact on wear behavior of punches during embossing operations. Dry Metal Forming Open Access Journal FMT 1, 2015, 103-107 mehr…
  • Tröber, P.; Golle R.; Volk W.; :: Entstehung thermoelektrischer Effekte im Umformwerkzeug und deren Auswirkung auf den Verschleiß. Werkstoffwoche 2015, 2015 mehr…
  • Vogt, S.; Kraller, S.; Volk, W.: Effects of twisted windings on the impedance of e-traction drives. 5th International Electric Drives Production Conference (EDFC) 2015, 2015 mehr…
  • Volk W., Böttcher O., Feistle M., Gaber C., Jocham D.: Advanced Failure Prediction in Sheet Metal Forming. Advanced constitutive models in sheet metal forming, Institute of Virtual Manufacturing, ETH Zurich, 20158th Forming Technology Forum Zurich 2015, 43-47 mehr…
  • Volk W.; Stahl J.: Shear Cutting. In: CIRP Encyclopedia of Production Engineering. SpringerLink, 2015 mehr…
  • Volk, W.; Jocham, D.; Gaber, C.; Böttcher, O.: Neue Methodik zur Vorhersage des Materialversagens bei nicht-linearen Dehnwegen. 35. EFB-Kolloquium 2015 Intermezzo der hybriden Werkstofflösungen, 2015, 201-214 mehr…
  • Volk, W.; Opritescu, D.; Jocham, D.: Prediction of formability for non-linear deformation history and press hardening processes. Plastic Behavior of Conventional and Advanced Materials: Theory, Experiment, and Modeling, NEAT PRESS, 2015, 175-177 mehr…
  • Volk, W.; Weinschenk, A.: Aufsprungprävention bei Strukturbauteilen – Ergebnisse eines Vorhabens der industriellen Gemeinschaftsforschung (IGF) . Europäische Forschungsgesellschaft für Blechverarbeitung e.V, 2015, mehr…
  • Weiß, M.; Volk, W.: Influence of Kinematics during Roller Clinching on Joint Properties. Journal of Manufacturing Science and Engineering, 2015 mehr…
  • Weiß, M.; Volk, W.: Einfluss von Reibung auf die Verbindungsausbildung beim Rotationsclinchen. 18. Workshop Simulation in der Umformtechnik & 3. Industriekolloquium des SFB/TR73, Shaker Verlag, 2015, 211-213 mehr…

2014

  • Benkert, T.; Thümmel, T.; Krinner, A.: Entwurf eines Pressenantriebes zum Hochgeschwindigkeitsscherschneiden. 17. VDI Getriebetagung Bewegungstechnik 2014, VDI Verlag GmbH, 2014, 135-146 mehr…
  • Feistle, M.; Demmel, P.; Golle, R.; Volk, W.: Bestimmung und Optimierung der prozessbeeinflussenden Parameter beim Durchsetzen hochfester Stähle. NEBU 2014, Neuere Entwicklungen in der Blechumformung, 2014 mehr…
  • Gläsner, T.; Sunderkötter, C.; Plath, A.; Bednarz, M.; Volk, W.; Hoffmann, H.; Golle, R.: Methods to decrease cut edge sensitivity of high strength steels. 17th Conference of the European Scientific Association on Material Forming, ESAFORM 2014, 2014, 1294-1307 mehr…
  • Jocham, D.; Golle, R.; Volk, W.: Wear behavior of austempered ductile Iron (ADI) in cutting and forming tools. IDDRG 2014 - Innovations for the sheet metal industry, 2014, 393-398 mehr…
  • Jocham, D.; Sunderkötter, C.; Helmholz, R.; Marusch, H.-E.; Volk, W.: Failure Prediction in direct press hardening through virtual forming limit curves based on measurable material properties. Warm and Hot Forming, 2014Proceedings of the 7th Forming Technology Forum, 75-80 mehr…
  • Langbein, F.; Anders, K.; Mittler, T.; Pintore, M.; Wimmer, M.; Heugenhauser, S.; Kaschnitz, E.: Aluminium Gleitlager der Zukunft - Innovation durch einen neuen Halbzeug Fertigungsprozess. LEICHTMETALLE - PROZESSE - ANWENDUNGEN: Zukunftstechnologien als Basis für neue Mobilitätskonzepte, 20148. Ranshofener Leichtmetalltage, 60-73 mehr…
  • Li, Xiaohu; Hofmann, Michael; Saal, Patrick; Meier, Leopold: In-situ Synchrotron and Neutron Diffraction studies on phase transformation in Austempered Ductile Iron (ADI). The European Powder Diffraction Conference, 2014 mehr…
  • Li, Xiaohu; Saal, Patrick; Hölzel, Markus; Hofmann, M.: Phase transformation in ADI during heat treatment and applied load - neutron and synchrotron diffraction. Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten 2014 2014 mehr…
  • Nerl, Christoph; Wimmer, Martin; Hoffmann, Harmut; Kaschnitz, Erhard; Langbein, Falko; Volk, Wolfram: Development of a Continuous Composite Casting Process for the Production of Bilayer Aluminium Strips. Journal of Materials Processing Technology 214 (7), 2014, 1445-1455 mehr…
  • Ramakrishnan, Robert; Griebel, Benjamin; Volk, Wolfram; Günther, Daniel; Günther, Johannes: 3D Printing of Inorganic Sand Moulds for Casting Applications. Advanced Materials Research 1018, 2014, 441-449 mehr…
  • Reihle, M.; Hofmann, M.; Wasmuth, U.; Volk, W.; Hoffmann, H.; Petry, W.: In-situ strain measurements during casting using neutron diffraction. Materials Science Forum 768-769, 2014, 486-491 mehr…
  • Rill, Daniel; Weiß, Maria; Hoffmann, Hartmut; Volk, Wolfram: Simulation assisted analysis of material flow in roller clinched joints. Advanced Materials Research 966-967, 2014, 628-640 mehr…
  • Saal, Patrick; Meier, Leopold; Li, Xiaohu; Hofmann, Michael; Volk, Wolfram: In-situ Neutron Diffraction of the Phase Transformation Kinetics in Austempered Ductile Iron Heat Treatments. Materials Science Engineering, 2014 mehr…
  • Sachnik, P.; Volk, W.; Golle, R.; Hofmann, H.: The influence of temperature on zinc abrasion in deep drawing processes. 17th Conference of the European Scientific Association on Material Forming, ESAFORM 2014, 2014, 1039-1046 mehr…
  • Schöbel, Michael; Baumgartner, Georg; Gerth, Stefan; Bernardi, Johannes, Hofmann, Michael: Microstresses and crack formation in AlSi7MgCu and AlSi17Cu4 alloys for engine components. Acta Materialia 81, 2014, 401-408 mehr…
  • Sroka, R.; Pongratz, T.; Eder, M.; Domes, M.; Vogeser, M.; Johnson, T.; Siedeck, V.; Schroetzlmair, F.; Zengel, P.: Investigation on laser induced salivary stone fragmentation. SPIE Proceedings, SPIE, 2014 mehr…
  • Steentjes, Simon; Franck, David; Hameyer, Kay; Vogt, Simon; Bednarz, Martin; Volk, Wolfram; Dierdorf, Jens; Hirt, Gerhard; Schnabel, Volker; Mathur, Harshal Nikhil; Korte-Kerzel, Sandra: On the Effect of Material Processing: Microstructural and Magnetic Properties of Electrical Steel Sheets. 4th International Conference on Electric Drive Production, EDPC 2014 - Proceedings, 2014, 464-470 mehr…
  • Steentjes, Simon; Hameyer, Kay; Bednarz, Martin; Vogt, Simon; Volk, Wolfram; Dierdorf, Jens; Hirt, Gerhard: Influence of material processing steps annealing and cutting on magnetic materials´properties relevant for electrical machine design. 6th Forming Technology Forum, 2014 mehr…
  • Suh, J.; Victoria-Hernandez, J.; Letzig, D.; Golle, R.; Yi, S.; Bohlen, J.; Volk, W.: Improvement in cold formability of AZ31 Mg alloy sheets processed by equal channel angular pressing. The 2nd German-Korean Workshop on the production and industrial applications of semi-finished Mg products, 2014 mehr…
  • Suh, J.; Victoria-Hernandez, J.; Letzig, D.; Golle, R.; Yi, S.; Bohlen, J.; Volk, W.: Improvement of ductility at room temperature of Mg-3Al-1Zn alloy sheets processed by equal channel angular pressing. 11th International Conference on Technology of Plasticity, ICTP 2014, 2014 mehr…
  • Suh, J.; Victoria-Hernandez, J.; Letzig, D.; Golle, R.; Yi, S.; Bohlen, J.; Volk, W.: Improvement of ductility at room temperature of Mg-3Al-1Zn alloy sheets processed by equal channel angular pressing. Procedia Engineering 81, 2014, 1517-1522 mehr…
  • Thoma, Christopher; Volk, Wolfram; Heid, Ruben; Dilger, Klaus; Branner, Gregor; Eibisch, Harald: Simulation-Based Prediction of the Fracture Elongation as a Failure Criterion for Thin-Walled High-Pressure Die Casting Components. International Journal of Metalcasting 8 (4), 2014, 47-54 mehr…
  • Vogt, Simon; Volk, Wolfram: Umgeformte segmentierte Formstäbe für effizientere E-Traktionsantriebe. münchener kolloquium - Produktionskongress, 2014 mehr…
  • Vogt, Simon; Volk, Wolfram: Segmented Hairpins Made of Metal Formed Round Wires. Coiltech 2014 - World Magnetic Conference, 2014 mehr…
  • Volk, W.; Benkert, T.; Thümmel, T.; Krinner, A.: Mechanische Schnellläuferpresse mit Koppelrastgetriebe. Fabrik der Zukunft. 5 Jahre Erfahrung mit Servopressen, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2014, 71-93 mehr…
  • Volk, W.; Feistle, M.; Golle, R.; Opritescu, D.: Advances in the Shear Cutting of Press Hardened Steels. Warm and Hot Forming, University of Twente, 2014, 41-46 mehr…
  • Volk, W.; Weiß, M.: German Priority Program of Mechanical Joining. 11th International Conference on Technology of Plasticity (ICTP) Nagoya, 2014 mehr…
  • Volk, Wolfram; Jocham, David: Verschleißverhalten von Guss- und Sondergusswerkstoffen beim Schneiden – Ergebnisse eines Vorhabens der industriellen Gemeinschaftsforschung (IGF). Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2014, mehr…
  • Weinschenk, Annika; Volk, Wolfram: Decrease of Springback by Geometrical Modification of the Sheet Metal Part. Advanced Materials Research 1018, 2014, 277-284 mehr…
  • Wiedenmann, O.; Ramakrishnan, R.; Saal, P.; Kılıç, E; Siart, U.; Eibert, T.F.; Volk, W.: Local microwave heating of sand molds as a means to overcome design limitations in sand mold casting. Advances in Radio Science 12, 2014, 21-28 mehr…

2013

  • Baumgartner, Georg: Aufbau eines Mikrostrukturmodells. Leichtbau in Guss, 2013 mehr…
  • Demmel, P.: Einfluss der Prozessparameter auf die thermische Beanspruchung der Schneidkanten beim Scherschneiden. Der Schnitt- & Stanzwerkzeugbau (4), 2013, 8-13 mehr…
  • Demmel, P.; Golle, R. ; Hoffmann, H. ; Volk, W.: Thermische Beanspruchung der Schneidkante beim Scherschneiden. 5. Kongress Stanztechnik, 2013 mehr…
  • Demmel, P.; Pazureck, A.; Golle, R.; Volk, W., Hoffmann, H.: Characterization of the thermoelectric behavior of plastically deformed steels. Journal of Electronic Materials, 2013 mehr…
  • Demmel, P.; Tröber, P.; Kopp, T.; Golle, R.; Volk, W.; Hoffmann, H.: Characterization of the thermoelectric behavior of plastically deformed steels by means of relative Seebeck coefficient. Materials Science Forum 755, 2013, 1-7 mehr…
  • Hippmann, Sophie; Li, Qianqian; Addinall, Raphael; Volk, Wolfram: Carbon nanotubes–reinforced copper matrix composites produced by melt stirring. Journal of Nanoengineering and Nanosystems 227 (2), 2013, 63-66 mehr…
  • Jocham, D.; Bednarz, M.; Volk, W.: Steigerung der Produktivität durch den Einsatz von ADI als Werkzeugwerkstoff. 34. EFB Kolloquium / Tagungsband T36 EFB Kolloquium 04/13, 2013, 99-111 mehr…
  • Jocham, David; Bednarz, Martin; Volk, Wolfram: Steigerung der Produktivität durch den Einsatz von ADI als Werkzeugwerkstoff. Umformen, Schneiden, Verbinden im Leichtbau, 2013 mehr…
  • Kilic, E.; Siart, U. ; Wiedenmann, O. ; Faz, U. ; Ramakrishnan, R. ; Saal, P. ; Eibert, T. F.: Cavity Resonator Measurement of Dielectric Materials Accounting for Wall Losses and a Filling Hole. IEEE Transactions on Instrumentation and Measurement 62 (2), 2013, 401-407 mehr…
  • Kuppert, Andreas; Merklein, Marion; Friebe, Harald; Moller, Theodor; Hotz, Walter; Volk, Wolfram: Influence of strategy of evaluation on forming limit curve. Materials Testing 55 (9), 2013, 668-672 mehr…
  • Mair, J.; Canti, R.; Golle, R.; Volk, W.; Hoffmann, H.: Dynamic strength behaviour of punch connections in shear cutting processes. 15th International Conference on Sheet Metal (SHEMET) / Key Engineering Materials, 2013, 262-269 mehr…
  • Meier, Leopold; Hofmann, Michael; Saal, Patrick; Volk, Wolfram; Hoffmann, Hartmut: In-situ measurement of phase transformation kinetics in austempered ductile iron. Materials Characterization 85, 2013, 124-133 mehr…
  • Thoma, C.; Volk, W.; Branner, G.; Eibisch, H.: Simulationsgestützte Optimierung der Maßhaltigkeit in der Prozesskette Druckguss. Deutscher Gießereitag 2013 & 5. NEWCAST-Forum, 2013 mehr…
  • Thoma, Christopher; Volk, Wolfram; Branner, Gregor; Eibisch, Harald: Simulationsgestützte Optimierung der Maßhaltigkeit von dünnwandigen Strukturbauteilen in der Prozesskette Aluminium-Druckguss. Giesserei-Praxis - Druckguss (7-8), 2013, 332-335 mehr…
  • Vogt, S.; Thalmeier, M.; Rill, D.; Volk, W.; Kindersberger, J.: High voltage aluminium connector (LEIKO). CoFAT, 2013 mehr…
  • Vogt, Simon; Thalmeier, Martin; Rill, Daniel; Volk, Wolfram; Kindersberger, Josef: LEIKO – An aluminium high voltage connector for hybrid cars. 3rd International Conference - Advanced Automotive Cabling 2013, 2013 mehr…
  • Volk, W.; Opritescu, D.; Gritzmann, P.; Schmiedl, F.: Automatisiertes Kopiertreiben - Analyse und Katalogisierung von Bauteilen und Fertigungsstrategien. Europäische Forschungsgesellschaft für Blechverarbeitung, 2013, mehr…
  • Volk, W.; Weiss, H.; Jocham, D.; Suh, J.: Phenomenological and numerical description of localized necking using generalized forming limit concept. IDDRG Proceedings 2013, Towards Zero Failure Production Methods by Advanced Modeling Techniques and a Process Integrated Virtual Control, 2013, 16-21 mehr…
  • Volk, Wolfram; Kim, Jae Kun; Suh, Joungsik; Hoffmann, Hartmut: Anisotropic plasticity model coupled with strain dependent plastic strain and stress ratios. CIRP Annals - Manufacturing Technology 62 (1), 2013, 283–286 mehr…
  • Volk, Wolfram; Suh, Joungsik: Prediction of formability for non-linear deformation history using generalized forming limit concept (GFLC). NUMISHEET 2014 2013, 2013 mehr…
  • Volk, Wolfram; Suh, Joungsik: Prediction of formability for non-linear deformation history using generalized forming limit concept (GFLC). NUMISHEET 2014, AIP Publishing LLC, 2013, 556-551 mehr…

2012

  • Baumgartner, Georg: µ-FE und Sensitivitätsanalyse: Aufbau eines Mikrostrukturmodells. AGIFA Symposium, 2012 mehr…
  • Demmel, P.; Nothhaft, K.; Golle, R.; Hoffmann, H.: Zerteilen. In: Spur, Günter; Neugebauer, Reimund; Hoffmann, Hartmut (Hrsg.): Handbuch Umformen. Carl Hanser Verlag, 2012, 679-729 mehr…
  • Demmel, Peter; Kopp, Thomas; Golle, Roland; Volk, Wolfram; Hoffmann, Hartmut: Experimental Investigation on the Temperature Distribution in the Shearing Zone During Sheet Metal Blanking. Steel Research International, 2012 mehr…
  • Demmel, Peter; Hirsch, Martin; Golle, Roland; Hoffmann, Hartmut: In Situ Temperature Measurement in the Shearing Zone during Sheet Metal Blanking. Advanced Materials Research 445, 2012, 207-212 mehr…
  • Kreth, U.; Hoffmann, H.; Demmel, P.; Nothhaft, K.: Werkzeugmaschinen zum Tiefziehen. In: Spur, Günter; Neugebauer, Reimund; Hoffmann, Hartmut (Hrsg.): Handbuch Umformen . Carl Hanser Verlag (2. Aufl.), 2012, 518-528 mehr…
  • Nerl, Ch.; Wimmer, M.: Simulation of Continuous Casting – Process Development for the Production of Bilayer Aluminium Strips. International WinCast® User Meeting, 2012 mehr…
  • Nerl, Ch.; Wimmer, M.; Hofer, P.; Kaschnitz, E.: Design of a Mould System for Horizontal Continuous Casting of Bilayer Aluminium Strips. World Academy of Science, Engineering and Technology (68), 2012, 1840-1845 mehr…
  • Neugebauer, R.; Kräusel, V.; Barthel, T.; Volk, W.; Hoffmann, H.; Golle, R.; Kopp, T.: Entwicklung kalkulatorischer Kenngrößen zur Gestaltung von Scherschneidprozessen und Bewertung der Bauteilqualität bei Anwendung hoher Schneidgeschwindigkeiten. 32. EFB-Kolloquiums Blechverarbeitung / EFB-Tagungsband Nr. 33, Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2012, 179-192 mehr…
  • Nothhaft, K.; Krinninger, M.; Golle, M.; Volk, W.: Tool wear for shear cutting of ultra high strength steels according to different tool materials and tool geometries. 9th International Tooling Conference, 2012 mehr…
  • Nothhaft, Katrin; Suh, Joungsik; Golle, Matthias; Picas, Ingrid; Casellas, Daniel; Volk, Wolfram: Shear cutting of press hardened steel: influence of punch chamfer on process forces, tool stresses and sheared edge qualities. Production Engineering - Research and Development 6 (4-5), 2012, 413-420 mehr…
  • Opritescu, D.; Sachnik, P.; Yang, Z.; Golle, R.; Volk, W.; Hoffmann, H.; Schmiedl, F.; Ritter, M.; Gritzmann, P.: Automated Driving by Standardizing and Scaling the Manufacturing Strategy. Procedia CIRP 3, 2012, 138-143 mehr…
  • Ostermair, Martin; Golle, Matthias; Krinninger, Michael; Nürnberg, Gerald; Volk, Wolfram: Forming and Shearing of Magnesium. 1st German-Korean Workshop, 2012 mehr…
  • Schilp, Hansjörg; Suh, Joungsik; Hoffmann, Hartmut: Reduction of springback using simultaneous stretch-bending processes. International Journal of Material Forming 5 (2), 2012, 175-180 mehr…
  • So, H.; Faßmann. D.; Hoffmann, H.; Golle, R.; Schaper, M.: An investigation of the blanking process of the quenchable boron alloyed steel 22MnB5 before and after hot stamping process. Journal of Materials Processing Technology 212 (2), 2012, 437-449 mehr…
  • Thoma, C.; Branner, G.: Prozesse frühzeitig simulieren - Bauteile wirtschaftlich fertigen. 7. Magma-Forum NE und Leichtmetall 2012, 2012 mehr…
  • Volk, W.; Demmel P.: Gratfreies Scherschneiden. bayme vbm BayPAT-Patent-Workshop, 2012 mehr…
  • Volk, W.; Hoffmann, H.; Suh, J.; Kim, J.: Failure Prediction for Nonlinear Strain Paths in Sheet Metal Forming. 62nd CIRP General Assembly, 2012 mehr…
  • Volk, W.; Hoffmann, H; Rill, D.: Circular point clinching with rotating tools [Rundpunkt-Clinchen mit rotierenden Werkzeugen]. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 107 (7-8), 2012, 537-540 mehr…
  • Volk, W.; Suh, J.: RELIABLE AND ROBUST EVALUATION OF LOCAL NECKING WITH A GENERALIZED THINNING LIMIT DIAGRAM. 5th Forming Technology Forum 2012; Advanced Failure Prediction Methods in Sheet Metal Forming, 2012, 115-120 mehr…
  • Volk, Wolfram; Hoffmann, Hartmut; Suh, Joungsik; Kim, Jaekun: Failure prediction for nonlinear strain paths in sheet metal forming. CIRP Annals - Manufacturing Technology 61 (1), 2012, 259-262 mehr…
  • Volk, Wolfram; Hoffmann,Hartmut; Suh, Joungsik; Kim, Jaekun: Failure prediction for nonlinear strain paths in sheet metal forming. CIRP ANNALS-MANUFACTURING TECHNOLOGY , 2012 mehr…
  • Wagener, W.; Woisetschläger, P.: Integration innovativer berührungsloser Messtechnik in der Prozesskette des thermischen Beschichtens von Zylinderlaufflächen. 5. Hommel-Etamic Symposium für berührende und berührungslose Fertigungsmesstechnik, 2012 mehr…
  • Wiedenmann, Oliver; Ramakrishnan, Robert; Kilic, Emre; Saal, Patrick; Siart, Uwe; Eibert, Thomas F.: A multi-physics model for microwave heating in metal casting applications embedding a mode stirrer. Microwave Conference (GeMiC), 2012 The 7th German, 2012, 4 mehr…
  • Wimmer, M.; Nerl, Ch.; Riedel, S.; Hoffmann, H.: Herstellung neuartiger Al-Verbundwerkstoffe zur Anwendung in Gleitlagern. Giesserei (12/2012), 2012, 42-51 mehr…

2011

  • Leitungsanordnung. 2011, (anderer Eintrag) mehr…
  • Kontaktvorrichtung zur Herstellung einer lösbaren Verbindung zwischen zwei Komponenten. 2011, (anderer Eintrag) mehr…
  • Cai, Q.; Volk, W.; Düster, A.; Ranka, E.: A new strategy for stiffness evaluation of sheet metal parts. AIP Conference Proceedings , 20118th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, NUMISHEET 2011, 525-532 mehr…
  • Groche, P.; Moeller, N.; Hoffmann, H.; Suh, J.: Influence of gliding speed and contact pressure on the wear of forming tools. Wear 271 (9-10), 2011, 2570–2578 mehr…
  • Hirsch, M.; Golle, R.; Hoffmann, H.: Tool-Endurance of High-Speed Stamping Tools with Plates of Magnesium and Carbon Fibre Laminate. Steel Research International, Special Edition: 10th International Conference on Technology of Plasticity (ICTP), 201125.09.2011-30.09.2011, 564-569 mehr…
  • Hirsch, M.; Hoffmann, H.: Aluminium und Magnesium als Plattenwerkstoff in schnelllaufenden Stanzwerkzeugen. 31. EFB-Kolloquium Blechverarbeitung 2011; Hochfeste und hybride Materialien - Schnelle Umform- und Fügeverfahren, 201129.03.2011-30.03.2011 Bad Boll mehr…
  • Hirsch, M.; Krönauer, B.; Golle, R.; Hoffmann, H.; Golle, M.; Jesner, G.: Innovative Tools and Tool Steels for the Blanking of Press-Hardened Ultra High-Strength Manganese-Boron Steels. International Conference on Advances in Materials and Processing Technologies (AMPT) / Advances in Materials and Processing Technologies II (Advanced Materials Research), TRANS TECH PUBLICATIONS LTD, 201126.10.2009-29.10.2009, 123-128 mehr…
  • Hirsch, Martin; Demmel, Peter; Golle, Roland; Hoffman, Hartmut: Light Metal in High-Speed Stamping Tools. 14th International Conference on Sheet Metal (SHEMET) / Key Engineering Materials, TRANS TECH PUBLICATIONS LTD, 2011, 259-266 mehr…
  • Hoffmann, H.; Volk, W.; Ostermair, M.: Herstellung von Schneidaktivelementen mittels Verbundguss – EFB-Forschungsbericht Nr. 341. , Hrsg.: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB): Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2011, mehr…
  • Hoffmann, Hartmut; Hirsch, Martin: EFB-Forschungsbericht Nr. 335; Leichtmetallwerkstoffe in schnell laufenden Stanzwerkzeugen. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2011, mehr…
  • Hoffmann, Hartmut; Saal, Patrick, Mair, Josef: Bionische Ansätze am Beispiel der Strukturoptimierung von Großwerkzeugen und der Entwicklung metallischer Klettverschlüsse. 5. Werkstoffsymposium der Gesellschaft für Werkstoffprüfung, 2011 mehr…
  • Kim, J.; Suh, J.; Hoffmann, H.; Golle, R.: Determination of uniaxial flow stress curve using aero-bulge test for very thin copper sheet. International Conference on Advances in Materials and Processing Technologies, AMPT 2009, 2011, 608-613 mehr…
  • Langer, S.; Kirschner, R.; Rill, D.; Vogt, S.: Zyklengetriebenes Innovationsmanagement am Beispiel von Aluminium-Hochvoltbordnetzen. ATZ Elektronik (01/2011 ), 2011, 56-61 mehr…
  • Meier, L.; Hofmann, M.; Hoffmann, H.: In-Situ Study of the Influence of Heat Treatment Parameters and Alloying on the Austempering of Ductile Iron. European Cast Iron Meeting 2011, 2011 mehr…
  • Meier, L.; Hofmann, M.; Hoffmann, H.; Volk, W.: Characterisation of Phase Transformation Kinetics in Austempered Ductile Iron (ADI) by In-Situ Neutron Diffraction. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2011), 201112.09.2011-15.09.2011, Montpellier mehr…
  • Meier, L.; Hofmann, M.; Hoffmann, H.; Volk, W.: In-Situ Measurement of the Phase Transformation Kinetics of Austempered Ductile Iron (ADI). 7th International Conference on Processing & Manufacturing of Advanced Materials (THERMEC'2011), Trans Tech Publications, 201101.08.2011-05.08.2011; Quebec mehr…
  • Nerl, C.; Riedel, S.; Wimmer, M.: Horizontales Stranggießen von CuZn37 - Numerische und experimentelle Untersuchungen zur Beeinflussung der Wärmeabfuhr aus der Kokille. METALL (11/2011), 2011, 497-500 mehr…
  • Nerl, C.; Wimmer, M.; Hoffmann, H.; Langbein, F.: Einsatz der Gießprozesssimulation zur Entwicklung eines kontinuierlichen Verbundgießverfahrens. VDI-Tagung Gießtechnik im Motorenbau, 2011Gießereitechnisches Doktorandenseminar mehr…
  • Neugebauer, R.; Kräusel, V.; Barthel, T.; Hoffmann, H.; Golle, R.; Kopp, T.: Entwicklung kalkulatorischer Kenngrößen zur Gestaltung von Scherschneidprozessen und Bewertung der Bauteilqualität bei Anwendung hoher Schneidgeschwindigkeiten. 31. EFB-Kolloquium Blechverarbeitung / EFB-Tagungsband T32, Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2011, 161-173 mehr…
  • Nürnberg, G.; Jing, X.; Scherer, D.; Ersoy-Nürnberg, K.; Golle, R.; Bohlen, J.; Fuskova, L.; Letzig, D.; Hoffmann, H.: Improving the sheared edge in the blanking of commercial AZ31 sheet through texture modification. Journal of Materials Processing Technology 211 (12), 2011, 2022-2031 mehr…
  • Ramakrishnan, Robert; Lodes, Matthias A.; Rosiwal, Stefan M.; Singer, Robert F.: Self-supporting nanocrystalline diamond foils: Influence of template morphologies on the mechanical properties measured by ball on three balls testing. ACTA MATERIALIA 59 (9), 2011, 3343-3351 mehr…
  • Saal, P; Drude, N; Hoffmann, H; Scheurle, J: Mechanical Optimization of Large Forming Tools with Respect to Residual Stresses. European Cast Iron Meeting, 2011 mehr…
  • Saal, Patrick: Mechanische Optimierung von Umformwerkzeugen unter Berücksichtigung von Eigenspannungen. 6. Bayerische Barbaratagung, 2011 mehr…
  • Saal, Patrick; Meier, Leopold: Reduction of residual stresses in forming tools – stress reduction in topology optimized cast parts by well chosen geometric parameters. International Foundry Research (02/2011), 2011, 2-8 mehr…
  • Saal, Patrick; Meier, Leopold: Reduzierung von Eigenspannungen in Umformwerkzeugen: Spannungsreduzierung in topologieoptimierten Gussbauteilen durch gezielte Variation von Geometrieparametern. Giesserei (02/2011), 2011, 40-47 mehr…
  • Thoma, C.: Strukturbauteile für zukunftsweisende Leichtbauarchitekturen - Konzeption, Simulation, Vision. 6. Bayerische Barbara-Tagung, 2011 mehr…
  • Volk, W.; Heinle, I.; Grass, H.: Accurate determination of plastic yield curves and an approximation point for the plastic yield locus with the bulge test. Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, 2011, 799-804 mehr…
  • Volk, Wolfram; Hoffmann, Hartmut; Golle, Roland; Kopp, Thomas: Herausforderungen bei der wirtschaftlichen Umsetzung von Mischbaukonzepten. Tagungsband, CBC 2011, 6. Chemnitzer Karosseriekolloquium, Verlag Wissenschaftliche Scripten, 2011 mehr…
  • Volk, Wolfram; Hora, Pavel: New algorithm for a robust user-independent evaluation of beginning instability for the experimental FLC determination. International Journal of Material Forming 4 (3), 2011, 339-346 mehr…
  • Volk, Wolfram; Hora, Pavel: Evaluation of Experimental Forming Limit Curves and Investigation of Strain Rate Sensitivity for the Start of Local Necking. THE 8TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET 2011) / AIP Conference Proceedings (AIP Conference Proceedings), AIP Publishing LLC, 2011Seoul (Republic of Korea); 21.08.2011-26.08.2011, 99-106 mehr…
  • Wimmer, M.; Nerl, C.; Riedel, S.; Hoffmann, H.; Langbein, F.: Herstellung neuartiger Al-Verbundwerkstoffe zur Anwendung in Gleitlagern – Gießereitechnik im Motorenbau. VDI, VDI Verlag GmbH (Düsseldorf) , 2011, mehr…
  • Yang, Z.; Golle, M.; Hoffmann, H.: Production of individualised sheet metal parts using incremental shrinking. Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011, 2011, 1120-1125 mehr…
  • Yang, Z; Scherer, D.; Golle, M.; Hoffmann, H.: Geometrical modeling of the sheet metal parts in the incremental shrinking process. 14th International Conference on Sheet Metal, SheMet 2011, 2011, 509-515 mehr…

2010

  • Albers, A.; Majic, N.; Krönauer, B.; Hoffmann, A.: Stiffening of sheet metal with failure-free bead patterns. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2010, 875-883 mehr…
  • Dirndorfer, S.; Schmid, W.; Breitkreutz, H.; Jungwirth, R.; Juranowitsch, H.; Petry, W.; Jarousse, C.; Hirsch, M.: Characterization of bond strength of monolithic two metal layer systems. Transactions Research Reactor Fuel Management (RRFM) 2010, European Nuclear Society, 201021.03.2010-25.03.2010 Marrakech; Marokko, 472-476 mehr…
  • Hoffmann, H.; Maier-Komor, P.: Beschneiden von Hohlprofilen mit dem impulsmagentischen Schneidverfahren – EFB-Forschungsbericht Nr. 319. Europäische Forschungsgesellschaft für Blechverarbeitung e.V., 2010, mehr…
  • Hoffmann, H.; Riedel, S.; Nerl, C.; Wimmer, M.: Stranggießen mit gesteuerter Flüssigmetall-Umlaufkühlung. Vortragstexte des Symposiums Stranggießen, 2010, 27-32 mehr…
  • Hoffmann, H; Golle, R.; Demmel, P.; Mair, J.; Nürnberg, G.; Ostermair, M.: Advances in Forming and Shearing Technologies. International Conference on Competitive Manufacturing COMA'10, 2010 mehr…
  • Hoffmann, Hartmut; Saal, Patrick: Ohne Umweg zum Produkt. Produktionskongress des münchener kolloquiums, Herbert Utz Verlag, 2010 mehr…
  • Hogg, Markus; Rexhaj, Raif; Bednarz, Martin: Scherschneiden von Blechen im Grenzwinkelbereich. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (11/2010), 2010, 1001-1004 mehr…
  • Kim, J.; Golle, R.; Hoffmann, H.: Investigation of size effects of very thin aluminum and copper sheets using aero-bulge test. Materials Science and Engineering: A; Structural Materials: Properties, Microstructure and Processing 527 (27-28), 2010, 7220–7224 mehr…
  • Krönauer, B.; Hirsch, M.; Golle, R.; Hoffmann, H.; Golle, M.; Jesner, G.: Beschneiden von pressgehärteten Blechen - Ultrahochfestes 22MnB5-Blech im Scherschneidprozess. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF) (01-02/2010), 2010, 26-30 mehr…
  • Krönauer, B.; Hirsch, M.; Golle, R.; Hoffmann, H.; Golle, M.; Jesner, G.; Pelloso, G.; Baron, L.; Hermann, M.: Further Results in Blanking Form-Hardened Ultra High Strength Manganese-Boron-Steels with Innovative Tools and Tool Steels. 50th anniversary conference 2010 IDDRG, 201031.05.2010-02.06.2010 Graz mehr…
  • Krönauer, B.; Majic, N.; Golle, M.; Hoffmann, H.; Albers, A.: Automated bead design considering production constraints. 10th International Conference on Numerical Methods in Industrial Forming Processes Dedicated to Professor O. C. Zienkiewicz (1921-2009), NUMIFORM 2010;, 2010, 1247-1255 mehr…
  • Krönauer, B.; Majic, N.; Hoffmann, H.; Albers, A.: Influence of production constraints on automatic generation of bead design. International Journal of Material Forming 3 (1), 2010, 109-112 mehr…
  • Langbein, F.; Nerl, C.; Wimmer, M.: Innovative Entwicklungen in der Welt der Aluminiumlagerwerkstoffe - Gleitende Lösungen für zukünftige Motorengenerationen. Leichtbau in Guss, Hanser, Tagungen & Seminare, 2010 mehr…
  • Ledentsov, Dmitry; Duester, Alexander; Volk, Wolfram; Wagner, Marcus; Heinle, Ingo; Rank, Ernst: Model adaptivity for industrial application of sheet metal forming simulation. Finite Elements in Analysis and Design 46 (7), 2010, 585-600 mehr…
  • Mackensen, A.; Golle, M.; Golle, R.; Hoffmann, H.: Experimental investigation of the cutting force reduction during the blanking operation of AHSS sheet materials. CIRP Annals - Manufacturing Technology 59 (1), 2010, 283-286 mehr…
  • Mackensen, A.; Hoffmann, H.: Investigation of a hybrid cutting tool design for shearing operations of sheet metals. Materials Science and Technology Conference and Exhibition 2010, 2010, 2447-2458 mehr…
  • Mackensen, A.; Hoffmann, H.: Investigation of a hybrid cutting tool design for shearing operations of sheet metals. AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010, 2010, 625-634 mehr…
  • Mackensen, A.; Ostermair, M.; Hoffmann, H.: Investigation of a composite cast cutting tool for blanking AHSS sheet materials. 50th International Deep Drawing Research Group (IDDRG) Conference, 201031.05.2010-02.06.2010 Graz mehr…
  • Maier-Komor, P.: Impulsmagnetisch Trennen. BLECH InForm (1/2010), 2010, 22-23 mehr…
  • Maier-Komor, P.; Hoffmann, H.; Ostermair, M.: Impulse magnetic cutting of hollow profiles. 50th International Deep Drawing Research Group (IDDRG) Conference, 201031.05.2010-02.06.2010 Graz mehr…
  • Maier-Komor, P.; Hoffmann, H.; Ostermair, M.: Beschneiden von Hohlprofilen mittels Impulsmagnetfeldern. Tagungsband T31 des 30. EFB-Kolloquiums Blechverarbeitung, EFB, 201002.03.2010-03.03.2010 mehr…
  • Maier-Komor, Paul; Hoffmann, Hartmut; Ostermair, Martin: Cutting of hollow profiles using electromagnetic fields. International Journal of Material Forming 3 (1 Supplement), 2010, 503-506 mehr…
  • Meier, L.; Hofmann, M.: ADI: Aktuelle Forschungsergebnisse zur Charakterisierung der Phasenumwandlungskinetik. 5. Bayerische Barbaratagung, 2010 mehr…
  • Meier, L.; Hofmann, M.; Hoffmann, H.: Kinetik der Phasenumwandlung in Ausferritischem Gusseisen. AGIFA-Symposium , 2010 mehr…
  • Meier, L.; Hofmann, M.; Hoffmann, H.: In-Situ-Untersuchung der Phasenumwandlungskinetik von Austempered Ductile Iron (ADI). Deutsche Tagung für Forschung mit Synchrotronstrahlung, Neutronen und Ionenstrahlen an Großgeräten (SNI2010), 201024.02.2010-26.02.2010; Berlin mehr…
  • Meier, L.; Schaaf, P.; Cusenza, S.; Höche, D.; Bamberger, M.; Amran, Y.; Weiss, K.; Hofmann, M.; Hoffmann, H.: Monitoring phase transition kinetics in austempered ductile iron (ADI). 6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009, 2010, 3394-3399 mehr…
  • Nerl, C.; Wimmer, M.; Riedel, S.; Hoffmann, H.; Hofer, P.: Kontinuierliches Verbundgießen von Al-Werkstoffen - die Simulation als Werkzeug zur Prozessauslegung. 5. Bayerische Barbaratagung, 2010 mehr…
  • Nerl, C.; Wimmer, M.; Riedel, S.; Hoffmann, H.; Hofer, P.: Simulationsgestützte Verfahrensentwicklung zum Verbundgießen von Aluminiumwerkstoffen. Vortragstexte des Symposiums Stranggießen, 2010, 93-98 mehr…
  • Ostermair, M.; Mackensen, A.; Bader, M.; Hoffmann, H.: Belastungsangepasste Werkzeuge aus Verbundguss. 54. Österreichische Gießereitagung: Grundlagen als Basis für Innovationen, 201022.04.2010-23.04.2010 mehr…
  • Ostermair, M.; Mackensen, A.; Bader, M.; Hoffmann, H.: Multi Material Design durch Verbundguss für Umform- und Schneidwerkzeuge. 2. Forum: Multi Material Design für Leichtbauanwendungen, 201018.05.2010; Landshut mehr…
  • Ostermair, M.; Mackensen, A.; Hoffmann, H.; Maier-Komor, P.: Verbundguss von Schneidaktivelementen. Tagungsband T31 des 30. EFB-Kolloquiums Blechverarbeitung, EFB, 201002.03.2010-03.03.2010 Bad Boll mehr…
  • Prexl, A.; Golle, M.; Hoffmann, H.; Kudraß, S.; Wahl, M.: Experimental and numerical investigation of forming and springback behavior and the resulting effects on industrial application on a structural part in mass production. International Conference on Advances in Materials and Processing Technologies, AMPT2010, 2010, 365-370 mehr…
  • Reihle, Matthias: Ermittlung von Eigenspannungen in Verbundgusskörpern mittels Neutronendiffraktometrie. Aalener Gießerei Kolloquium, 2010 mehr…
  • Rill, D.; Vogt, S.; Kirschner, R.; Thalmeier, M.; Haas, A.: Kostenoptimierter Leichtbau, Hochvolt-Bordnetz aus Aluminium. 2. Kongress Stanztechnik, 2010 mehr…
  • Sartkulvanich, P.; Krönauer, B.; Golle, R.; Konieczny, A.; Altan, T.: Finite element analysis of the effect of blanked edge quality upon stretch flanging of AHSS. CIRP Annals - Manufacturing Technology 59 (1), 2010, 279-282 mehr…
  • Scherer, D.; Yang, Z.; Hoffmann, H.: Driving - a flexible manufacturing method for individualized sheet metal products. International Journal of Material Forming 3 (1), 2010, 955-958 mehr…
  • Scherer, D.; Yang, Z.; Hoffmann, H.: Driving - A flexible manufacturing method for individualized sheet metal products. ICoPE2010 and 13th ICPE International Conference on Precision Engineering, 2010, 795-800 mehr…
  • Scherer, D.; Yang, Z.; Vogt, S.; Golle, M: Intelligent Driving – An Incremental Forming Method – for Customized Sheet Metal Products. 7th CIRP Intelligent Computation In Manufacturing Engineering (ICME), 2010 mehr…
  • Wimmer, M.; Nerl, C.; Riedel, S.; Hoffmann, H.: Herstellung von Aluminium-Verbundwerkstoffen im horizontalen Strangguss. Vortragstexte des Symposiums Stranggießen, 2010, 39-44 mehr…

2009

  • Kraftfahrzeug mit einer Entlüftung des Innenraums in einen Kofferraum. 2009, (anderer Eintrag) mehr…
  • Bednarz, Martin: Auftrieb für den Antrieb. Blech in Form (02/09), 2009, 19 mehr…
  • Bednarz, Martin: Clever auf Serienkurs. Blech in Form (02/09), 2009, 24-25 mehr…
  • Brummer, Michaela; Saal, Patrick: Individualität bei Serienqualität. Blech in Form (06/2009), 2009, 74-75 mehr…
  • Brummer, Michaela; Saal, Patrick; Hoffmann, Hartmut: Endkonturnahes Abgießen in SLS-Sandformen: Optimierung der Oberflächenqualität durch Schlichten. Giesserei (12/2009), 2009, 30-34 mehr…
  • Drude, N.; Meier, L.; Hoffmann, H.; Scheurle, J.: Modellbasierte Strategien zur Optimierung der Verrippungsstruktur großer Umformwerkzeuge. Leichtbau in Guss, Mit Innovation in die Zukunft, 200906.10.2009-07.10.2009, Augsburg mehr…
  • Drude, N.; Meier, L.; Scheurle, J.; Hoffmann, H.: Model based strategies for an optimised ribbing design of large forming tools. Production Engineering 3 (4-5), 2009, 435-440 mehr…
  • Hippmann, S.; Brüning, H.; Hoffmann, H.: Mould Materials in Hyper Frequency Fields to Influence Solidification. 6th International Conference on Electromagnetic Processing of Materials, 2009Dresden; 19.10.2009-23.10.2009 mehr…
  • Hippmann, S; Lorenz, K.; Bogenberger, C.; Hoffmann, H.: Edge detection within qualitative phase contrast neutron radiographies of castings. Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 605 (1-2), 2009, 30-32 mehr…
  • Hirsch, M.; Golle, R.; Hoffmann, H.: Displacements in Punching Dies and their Effect on Tool Endurance. 8th International Tooling Conference (TOOL09), Verlag Mainz, 2009 mehr…
  • Hirsch, M.; Hoffmann, H.: Einfluss von Werkzeugverlagerungen beim Schneiden höherfester Bleche. Der Schnitt- & Stanzwerkzeugbau (04/2009), 2009 mehr…
  • Hirsch, M.; Hoffmann, H.: Einfluss von Verlagerungen in Schneidwerkzeugen auf die erreichbaren Standzeiten der Werkzeugaktivelemente – EFB-Forschungsbericht Nr. 293. Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2009, mehr…
  • Hirsch, Martin: Werkzeugverlagerungen beim Schneiden höherfester Bleche. Kongress Stanztechnik, 2009Dortmund; 27.04.2009-28.04.2009 mehr…
  • Hoffmann, H.; Golle, R.; Demmel, P.; Mair, J.; Nürnberg, G.; Hörmann, F.: Extension of blanking applications through innovation. Tagungsband des Feintool University Colloquium, 2009 mehr…
  • Hora, Pavel; Eberle, Beat; Volk, Wolfram: Numerical Methods for a Robust User-Independent Evaluation of Nakajima Tests for the FLC Determination. International Deep-Drawing Research Group , 2009Golden; Colorado; 01.06.2009-03.06.2009, 437-448 mehr…
  • Hörmann, F.; Demmel, P.: Qualitätsbeeinflussende Parameter (beim Scherschneiden). Blech Rohre Profile (11-2009), 2009 mehr…
  • Kim, J.; Hoffmann, H.; Golle, M.; Golle, R.: Untersuchung zum Werkstoffverhalten von sehr dünnen Kupferblechen. DFG-Abschlusskolloquium SPP 1138 Prozessskalierung, BIAS Verlag, 200911.02.2009-12.02.2009, 267-286 mehr…
  • Kim, J.; Suh, J.; Hoffmann, H.; Golle, R.: Determination of uniaxial flow stress curve using Aero-bulge test for very thin copper sheet. International Conference on Advances in Materials and Processing Technologies (AMPT), TRANS TECH PUBLICATIONS LTD, 2009, 608-613 mehr…
  • Mackensen, A.; Golle, M.; Golle, R.; Hoffmann, H.: Determination of the Hole Expansion Properties of AHSS using an Optical 3D Deformation System. IDDRG Proceedings, 200901.06.2009-03.06.2009, 547-558 mehr…
  • Mackensen, A.; Hippmann, S.: Mittels Verbundguss hergestellte Schneidaktivelemente. Verbundwerkstoffe: 17. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wiley VCH Verlag, 2009Bayreuth; 01.04.2009-03.04.2009 mehr…
  • Mackensen, A.; Hoffmann, H.: Effect of non-linear strain paths on the forming limit diagram of AHSS. Materials Science and Technology Conference and Exhibition 2009,, 2009, 2279-2289 mehr…
  • Maier-Komor, P.; Golle, R.; Hoffmann, H.: Nachbearbeitungsfreies Schneiden geschlossener Profile mit dem Impulsmagnetverfahren. Kolloquium Impulsmagnetumformung, 2009 mehr…
  • Mair, J.; Höhe, K.; Braun, K.: Metallische Klettverbindung - Metaklett. Blechexpo, 2009 mehr…
  • Mair, J.; Hörmann, F: Spanlose Trennverfahren für CFK - eine Alternative? Carbon Composites e.V., 2009 mehr…
  • Meier, L.; Schaaf, P.; Cusenza, S.; Höche D.; Bamberger, M.; Amran, Y.; Weiss, K.; Hofmann, M.; Hoffmann, H.:: Monitoring Phase Transition Kinetics in Austempered Ductile Iron (ADI). Materials Science Forum 638 - 642, 2009, 3394-3399 mehr…
  • Nürnberg, Gerald; Ostermair, Martin; Golle, Matthias; Hoffmann, Hartmut;: The Automotive Process Chain for Forming Magnesium Parts. 66th Annual World Magnesium Conference Proceedings, 200931.05.2009-02.06.2009, 126-136 mehr…
  • Ostermair, M.; Mackensen, A.; Hoffmann, H.: Verbundgießen von hybriden Werkzeugen. Euromold, Forum Werkstoffe - Werkstoffe – Fertigungsverfahren – Produktentwicklung für den Werkzeug- und Formenbau, 200902.12.2009 - 05.12.2009; Frankfurt mehr…
  • Ostermeier, M.; Brummer, M.; Hoffmann, H.; Werner, E.: Hot isostatic pressing of component parts made of light metal cast alloys Niche application or quantity production in the future? VDI Berichte (2061), 2009, 225-236 mehr…
  • Rank, E.; Ledentsov, D.; Volk, W.; Wagner, M.: Adaptive shell- solid coupling for industrial applications of sheet metal forming simulations. Proceedings of the International Conference on Computational Methods for Coupled Problems in Science and Engineering, International Center for Numerical Methods in Engineering, 2009 mehr…
  • Schaaf, P.; Cusenza, S.; Bamberger, M.; Amran, Y.; Weiss, K.; Meier, L.; Wasmuth, U.; Hofmann, M.: Phase transition kinetics in Austempered Ductile Iron (ADI). International Foundry Research 61 (02/2009), 2009, 14-21 mehr…
  • Scherer, D.; Hoffmann, H.; Lohmann, B.; Lueth, T. C.; Golle, M.; Weber, S.; Markert, M.; Yang, Z.: Driving as an Innovative Manufacturing Method for Individualized Sheet Metal Products. IDDRG 2009 Proceedings, 200901.06.2009-03.06.2009, 889-901 mehr…
  • Schilp, H.; Suh, J.; Hoffmann, H.: Reduction of springback using simultaneous stretch-bending processes. Advances in Materials and Processing Technologies (AMPT) Conference, 2009 mehr…
  • So, H.; Hoffmann, H.; Golle, R.: Blanking of press hardened ultra high strength steel. 2nd International conference on HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL (CHS2), 200915.06.2009-17.06.2009 mehr…
  • Volk, W.; Vu, T.-C.; Charvet, P.: Limitations of standard material models for industrial applications. Proceedings of Forming Technology Forum 2009 for Constitutive Modeling of Kinematic and Anisotropic Hardening Effects for Ductile Materials, 2009Rüschlikon (Zürich); 05.05.2009-06.05.2009 mehr…
  • Volk, Wolfram; Charvet, Pierre: Virtual engineering and planning process in sheet metal forming. Proceedings of the 7th European LS-Dyna Conference, DYNAmore, 2009Salzburg; 14.05.2009-15.05.2009 mehr…

2008

  • Halterungsvorrichtung. 2008, (anderer Eintrag) mehr…
  • Verfahren zur Oberflächenvergütung. 2008, (anderer Eintrag) mehr…
  • Halterungsvorrichtung. 2008, (anderer Eintrag) mehr…
  • Vorrichtung zum Umformen von Platinen sowie Verfahren zur Steuerung eines Werkstoffflusses im Bereich eines Platinenflansches. 2008, (anderer Eintrag) mehr…
  • Bednarz, Martin: Die neue Pressenfreiheit. Blech in Form (06/08), 2008, 35-37 mehr…
  • Braedel, M.; Palaniswamy, H.; Golle, M.; Hoffmann, H.; Altan, T.; Griesbach, B.: Investigation of Die Tryout Using Programmable Multipoint Cushion System for Stamping Large Automotive Body Panels. Proceedings of 9th International Conference of Technology in Plasticity (ITCP) 2008, 200807.09.2008-11.09.2008 mehr…
  • Eberle, Beat; Volk, Wolfram; Hora, Pavel: Automatic approach in the evaluation of the experimental FLC with a full 2D approach based on a time depending method. Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2008), 2008Interlaken; 01.09.2008-05.09.2008, 279-284 mehr…
  • Ersoy-Nürnberg, K.; Arbak, M.; Wagner, K.: Simulationstechniken: Kostengünstig optimieren. FORM und Werkzeug (5), 2008 mehr…
  • Ersoy-Nürnberg, Kivilcim; Nürnberg, Gerald; Golle, Matthias; Hoffmann, Hartmut: Simulation of wear on sheet metal forming tools—An energy approach. WEAR 265 (11-12), 2008, 1801-1807 mehr…
  • Faass, I.; Palaniswamy, H.; Hoffmann, H.; Altan, T.; Golle, M.; Griesbach, B.: Effect of spacers on the material flow for process control in automotive stamping. 9th International Conference on Technology of Plasticity, ICTP 2008, 2008, 1711-1716 mehr…
  • Hein, C.; Hong. S.; Suh, J.; Hoffmann H.; Kim N.: Finite element analysis of rotary blanking: Effects of punch geometries on cutting area and stress distribution. International Journal of Automotive Technology 9 (2), 2008, 211-216 mehr…
  • Hippmann, Sophie; Hein, Christoph; Hoffmann, Hartmut: Correlation between the adhesive tensile strength and the engagement grade of crosswise oriented nonwovens of metal hook and loop fasteners. Production Engineering 2 (4), 2008, 395-400 mehr…
  • Hoffmann H.; Ostermair M.: "Crash-Kurs Metallumformung für Kunststoffexperten". Proform - fachmesse für stanz- und spritzgießtechnik im innovativen technologieverbund mit fachforum verfahrensintegration, 200810.06.2008 - 13.06.2008; Dortmund mehr…
  • Hoffmann, H.; Schwickal, H.; Wimmer, M.: Mit Forschung die Zukunft gestalten - Nachhaltigkeit in der Industrie: Forderung an die Gießerei und ihre Zulieferer. Ashland Südchemie Kernfest GmbH - Vortragskolloquium, 2008Düsseldorf, 30.10.2008-31.10.2008 mehr…
  • Kim, J.; Hoffmann, H.: Untersuchung des Einflusses der Mikrostruktur des dünnen Kupferbleches auf die Werkstoffkennwerte. Metall (10/2008), 2008, 628-631 mehr…
  • Ledentsov, D.; Düster, A.; Rank, E.; Heinle, I.; Volk, W.; Wagner, M.;: Model adaptivity in the context of sheet metal forming. Proceedings of the 7th International Conference and Workshop on Numerical Simualtion of 3D Sheet Metal Forming Processes (Numisheet 2008), 2008Interlaken; 01.09.2008-05.09.2008, 455-460 mehr…
  • Ledentsov, D.; Düster, A.; Rank, E.; Heinle, I.; Volk, W.; Wagner, M.;: Dimensional adaptivity in finite element simulation of sheet metal forming. Proceedings of the 6th International Conference on Computation of Shell and Spatial Structures, IASS-IACM 2008: Spanning Nano to Mega, Curran Associates, Inc., 2008Ithaca; New York; 28.05.2008-31.05.2008 mehr…
  • Maier-Komor, P.; Hoffmann, H.: Titan in Serie schneiden. BLECH InForm, 2008 mehr…
  • Meier, L.: Gusseisen – ein Werkstoff mit Geschichte und Zukunft. Münchener Kolloquium - Innovationen für die Produktion : Produktionskongress, 200809.10.2008 mehr…
  • Meier, L.; Hoffmann, H.: Simulationsbasierte Auslegung von Umformwerkzeugen am Beispiel gegossener Wasserkästen für Hydromec-Umformung – EFB Abschlussbericht 14395N. , Hrsg.: Europäische Forschungsgesellschaft Für Blechverarbeitung E.V. (EFB): Europäische Forschungsgesellschaft Für Blechverarbeitung E.V. (EFB), 2008, mehr…
  • Meier, L.; Wasmuth, U.; Hofmann, M.; Reithmeier, G.; Schaaf, P.; Bamberger, M.: Phase Transformation Kinetics in Austempered Ductile Iron (ADI). Deutsche Neutronenstreutagung 2008, 200815.09.2008-17.09.2008 Garching mehr…
  • Nürnberg, G.; Ostermair, M.; Golle, M.; Hoffmann, H.: Forming of Magnesium. 16th Magnesium Automotive an User Seminar, EFM, Aalen, 2008, 200818.09.2008-19.09.2008 mehr…
  • Ofenheimer, A.; Kitting, D.; Koplenig, M.; Grass, H.; Volk, W.; Lipp, A.: Cost effective strategy to predict formability in two-step sheet forming operations. Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Numisheet 2008), 2008Interlaken; 01.09.2008-05.09.2008, 265-269 mehr…
  • Scherer, D.; Hoffmann, H.; Lohmann, B.; Lueth, T.C.; Golle, M.; Weber, S.: Driving as a flexible manufacturing method for individualized sheet metal products. 9th International Conference on Technology of Plasticity, ICTP 2008, 2008, 273-278 mehr…
  • So, H.; Hoffmann, H.; Golle, R.: Schneidstrategien zum wirtschaftlichen Zerteilen pressgehärteter Stahlbleche. Tagungsband zum 3. Erlanger Workshop Warmblechumformung, 2008, 149 - 168 mehr…
  • Volk, W.; Illig, R.; Kupfer, H.; Wahlen, A.; Hora, P.; Kessler, L.; Hotz, W.;: Virtual Forming Limit Curves. Part A: Physical Tryout report. The Numisheet 2008 Benchmark Study, 2008, 3-9 mehr…
  • Volk, W.; Lipp, A.; Ganser, M.: Simulation des Materialversagens bei der Blechumformung unter industriellen Rahmenbedingungen. Tagungsband des Workshops Umformsimulation, 2008 mehr…
  • Volk, W.; Wahlen, A.; Hora, P.; Kessler, L.; Hotz, W.: Virtual Forming Limit Curves. Part B: Benchmark Analysis. The Numisheet 2008 Benchmark Study (2008), 2008, 11-19 mehr…
  • Wasmuth, U.; Meier, L.; Hofmann, M.; Mühlbauer, M.; Stege, V.; Hoffmann, H.: Optimisation of composite castings by means of neutron measurements. CIRP Annals - Manufacturing Technology 57 (1), 2008, 579–582 mehr…
  • Wasmuth, U.; Meier, L.; Reihle, M.; Hofmann, M.: In-situ Strain Measurements in Composite Castings using Neutron Diffraction. Deutsche Neutronenstreutagung, 2008 mehr…

2007

  • MOUNTING DEVICE. 2007, (anderer Eintrag) mehr…
  • Halterungsvorrichtung. 2007, (anderer Eintrag) mehr…
  • MOUNTING DEVICE AND METHOD FOR PRODUCING. 2007, (anderer Eintrag) mehr…
  • Ersoy, K.; Golle, M.; Hoffmann, H.: Verschleißprognose von Werkzeugsegmenten aus alternativen Werkstoffen. 3D-Erfahrungsforum - Innovation im Werkzeug- und Formenbau, Herbert Utz Verlag, 200730.05.2007-31.05.2007 mehr…
  • Ersoy, Kivilcim; Nürnberg, Gerald; Herrmann, Gernot; Hoffmann, Hartmut: Advanced Prediction of Tool Wear by Taking the Load History into Consideration. 10TH ESAFORM Conference on Material Forming (AIP Conference Proceedings 907), AIP, 2007Zaragoza, 18.04.2007-20.04.2007, 697-702 mehr…
  • Hippmann, S.; Lorenz, K.; Schillinger, B.: Qualitative phase contrast tomography at FRM-II. European Neutron Radiography Association Meeting, 2007 mehr…
  • Hoffmann, H.; Golle, R.; Kim, J.; Hong, S.: Determination of the biaxial flow stress curve of very thin 99.5% Aluminum sheets. CIRP special session keynote paper 2007, 2007 mehr…
  • Hoffmann, H.; Hein, C.; Hong, S.; So, H.: Metaklett - A metal cocklebur. Key Engineering Materials , 2007, 677-684 mehr…
  • Hoffmann, H.; Hörmann, F.: Improving the cut edge by counter-shaving. Key Engineering Materials , 2007, 217-224 mehr…
  • Hoffmann, H.; Lohmann, B.; Lueth, T. C.; Golle, M.; Weber, S.; Scherer, D.; Markert, M.; Yang, Z.: Driving as a Flexible Innovative Manufacturing Method for Individualized Sheet Metal Products. IDDRG 2007, 200721.05.2007-23.05.2007 mehr…
  • Hoffmann, H.; Ostermeier, M.; Ricken, H.; Maier-Komor, P.; Vogl, C.: Chipless cutting of aluminium and magnesium die-casting parts. Casting Plant and Technology (1), 2007, 38-45 mehr…
  • Hoffmann, H.; Ostermeier, M.; Ricken, H.; Maier-Komor, P.; Vogl, C.: Spanloses Trennen von Al- und Mg-Druckgussteilen. GIESSEREI 94 (1), 2007, 16-21 mehr…
  • Hoffmann, H.; So, H.; Steinbeiss, H.: Design of hot stamping tools with cooling system. CIRP Annals - Manufacturing Technology 56 (1), 2007, 269-272 mehr…
  • Hoffmann, Hartmut; Nuernberg, Gerald; Ersoy, Kivilcim; Herrmann, Gernot; Golle, Roland: Simulationsgestützte Verschleißberechnung durch Ermittlung von Verschleißkoeffizienten bei der Blechumformung. Tagungsband T27 des EFB-Kolloquiums Blechverarbeitung „Neue Wege zum wirtschaftlichen Leichtbau - Innovative Lösungen zur Blechumformung und mechanischen Fügetechnik“, Europäische Forschungsgesellschaft für Blechverarbeitung e.V. (EFB), 2007am 6. und 7. März 2007 in Fellbach mehr…
  • Hoffmann, Hartmut; Zäh, Michael F.; Faaß, Ingo; Mork, Roland; Golle, Matthias; Griesbach, Bernd; Kerschner, Matthias: Automatic Process Control in Press Shops. 12th International Conference on Sheet Metal (SheMet 2007) / Sheet Metal 2007 / International Conference of Technology in Plasticity ICTP 2008 (Key Engineering Materials), TRANS TECH PUBLICATIONS LTD, 2007SheMet: 01.04.2007-04.04.2007 / ICTP: 07.09.2008-11.09.2008, 881-888 mehr…
  • Nürnberg, G.; Ersoy, K.; Herrmann, G.; Golle, R.; Hoffmann, H: Verschleißsimulation in der Blechumformung. Maschinenmarkt , 2007 mehr…
  • Ostermeier, M.; Hoffmann, H.; Werner, E.: The effects of hot isostatic pressing on aluminium castings. Key Engineering Materials , 2007, 1545-1548 mehr…
  • Rank, E.; Düster, A.; Ledentsov, D.; Heinle, I.; Volk, W.; Wagner, M.: An unified approach to multiscale simulation and dimensional adaptivity: basic principles and industrial applications. Proceedings of International Conference on Computational Methods for Coupled Problems in Science and Engineering, CIMNE, 200721.05.2007-23.05.2007 mehr…
  • Tomic, D; Kim, J: Verbesserung des Reibungs- und Verschleißverhaltens eines Synchronringes durch Optimierung von Umformwerkzeug- und Prozessparameter. 3D-Erfahrungsforum Innovation im Werkzeug- und Formenbau, 2007München; 30.05.2007-31.05.2007 mehr…

2006

  • UMFORMWERKZEUG ZUM HYDROMECHANISCHEN TIEFZIEHEN VON WERKSTÜCKEN AUS BLECHZUSCHNITTEN. 2006, (anderer Eintrag) mehr…
  • Forming tool for hydromechanically deep-drawing workpieces from sheet metal blanks. 2006, (anderer Eintrag) mehr…
  • Umformwerkzeug zum hydromechanischen Tiefziehen von Werkstücken aus Blechzuschnitten. 2006, (anderer Eintrag) mehr…
  • Ersoy, K.; Herrmann, G.; Nürnberg, G.; Golle, M.: Enhancing the Wear Simulation of Sheet Metal Forming Processes with Variable Wear Coefficients. Drawing the things to come: trends and advances in sheet metal forming; IDDRG Proceedings, 200619.06.2006-21.06.2006, 635-642 mehr…
  • Ersoy, K; Herrmann, G.; Nuernberg, G.; Golle, M.: Verbesserung der Verschleißsimulation in der Blechumformung mit hubanzahlabhängigen Verschleißkoeffizienten. gddrg, 2006 mehr…
  • Hein, C; Golle, M.: Industrielle metallische Klettverbindung. Tagungsband 8. Münchener Kolloquium, Herbert Utz Verlag, 200609.03.2006-10.03.2006 mehr…
  • Hoffmann, H.; Hong, S.: Tensile test of very thin sheet metal and determination of flow stress considering the scaling effect. CIRP Annals - Manufacturing Technology 55 (1), 2006, 263-266 mehr…
  • Hörmann, F.; Maier-Komor, P.: Möglichkeiten und Grenzen der Schneidsimulation. BLECH InForm (6/2006), 2006 mehr…
  • Maier-Komor, P.; Hörmann, F.: Simulation in der Stanztechnik - Möglichkeiten und Grenzen. Stamping-Days-Kongress, 200616.05.2006-17.05.2006 Pforzheim mehr…
  • Muthler, Alexander; Duester, Alexander; Volk, Wolfram; Wagner, Marcus; Rank, Ernst: High order thin-walled solid finite elements applied to elastic spring-back computations. Computer Methods in Applied Mechanics and Engineering 195 (41-43), 2006, 5377-5389 mehr…
  • Nuernberg, G.; Ersoy, K.; Herrmann, G.; Golle, R.; Hoffmann, H.: Verschleißverhalten von Umformwerkzeugen in der Großserie und dessen numerische Berechnung. Proceedings 5th Virtual Materials Processing Focus: Metals, Kompetenzzentrum Neue Materialien Nordbayern, 2006 mehr…
  • Nuernberg, G.; Ersoy, K.; Herrmann, G.; Golle, R.; Hoffmann, H.:: Verschleißverhalten von Umformwerkzeugen in der Großserie und dessen numerische Berechnung. Tagungsband zum 5th Virtual Materials Processing Focus: Metals, 200628.11.2006 - 29.11.2006 mehr…
  • Schilp, H.; Golle, R.; Petry, R.: Einfluss von Werkzeugwerkstoff und Oberfläche auf die Flitterbildung beim Scherschneiden von Aluminiumblechen im offenen Schnitt. Galvanotechnik (8/2006), 2006, 1838-1844 mehr…
  • Volk, Wolfram: New experimental and numerical approach in the evaluation of the FLDs with a FE-method. FLC-Zürich 2006; Proceedings of Forming Technology Forum 2006 for Numerical and Experimental Methods in Prediction of Forming Limits in Sheet Forming and Tube Hydroforming Processes, 2006Rüschlikon; Zürich; 15.03.2006-16.03.2006 mehr…

2005

  • Verfahren zum Fügen mindestens zweier Bauteile und Blindnied zur Durchführung des Verfahrens. 2005, (anderer Eintrag) mehr…
  • Verfahren zur hydromechanischen Umformung von Blechteilen und Umformwerkzeug zur Durchführung des Verfahrens. 2005, (anderer Eintrag) mehr…
  • Vorrichtung zum Umformen oder Zerteilen von Werkstücken mit integrierter Absaugeinrichtung. 2005, (anderer Eintrag) mehr…
  • Hoffmann, H.; Hautmann, R.; Petry, R.: Studies for the development of a simulation basis for numerically controlled driving of sheet metal. Sheet Metal 2005 - 11th International Conference, SheMet'05, 2005, 517-524 mehr…
  • Hoffmann, H.; Hwang, C.; Ersoy, K.: Advanced wear simulation in sheet metal forming. CIRP Annals - Manufacturing Technology 54 (1), 2005, 217-220 mehr…
  • Hoffmann, H.; Petri-Fink, A.; Steitz, B.; von Rechenberg, B; Hofmann, M.; Juillerat, J.: Superparamagnetic iron oxide nanoparticles for multiple biomedical applications. 2005 NSTI Nanotechnology Conference and Trade Show - NSTI Nanotech 2005 Technical Proceedings, 2005, 152-155 mehr…
  • Hoffmann, H.; Schweitzer, M.; Schmidt, T.; Hein, C.: Rotary blanking - A new manufacturing process. Steel Research International 76 (2-3), 2005 mehr…
  • Muthler, A.; Scholz, D.; Düster, A.; Volk, W.; Wagner, M.; Rank, E.: Adaptive p-FEM for springback analysis. Proceedings of the 5th International Conference on Computation of Shell and Spatial Structures, 2005 mehr…
  • Schilp, H.; Golle, R.; Petry, R.: Einfluss von Werkzeugwerkstoff und Oberfläche auf die Flitterbildung beim Scherschneiden von Aluminiumblechen im offenen Schnitt. Berichtsband über das 27. Ulmer Gespräch am 28. und 29. April 2005 in Neu-Ulm, 2005 mehr…

2004

  • Muthler, A.; Düster, A.; Volk, W.; Wagner, M.; Rank, E.;: High order finite elements applied to the computation of elastic spring back in sheet metal forming. MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2 / 8th International Conference on Numerical Methods in Industrial Forming Processes (AIP CONFERENCE PROCEEDINGS), AMERICAN INSTITUTE PHYSICS, 2004Columbus; 13.06.2004-17.06.2004, 946-951 mehr…
  • Schilp, H.; Hoffmann, H.; Golle, R.: Bis zu 97 % weniger Flitter beim Schneiden von Aluminiumblech. contact, 2004 mehr…
  • Schilp, H.; Hoffmann, H.; Golle, R.; Hoogen, M.: Flitterreduzierung beim Schneiden von Aluminiumblech. Blech Rohre Profile (2/2004), 2004, 78-79 mehr…
  • Schilp, H.; Hoffmann, H.; Golle, R.; Hoogen, M.: Reduzierung der Flitterbildung durch optimierte Werkzeugparameter beim Beschneiden von Aluminiumblechteilen. Neuere Entwicklungen in der Blechumformung, MAT-INFO, Werkstoff-Informationsges., 2004 mehr…
  • Schilp, H.; Hoffmann, H.; Golle, R.; Hoogen, M.: Blanking Aluminium Sheet Metal Parts - Reduction of Flaking by Optimizing Tool Parameters. New Developments in Sheet Metal Forming Technology, Mat-Info, 2004Fellbach; 10.05.2004-12.05.2004, 267-280 mehr…

2003

  • Umformwerkzeug zum hydromechanischen Tiefziehen von Werkstücken aus Blechzuschnitten. 2003, (anderer Eintrag) mehr…
  • Bletzinger, K.-U.; Volk, W.; Hartung, C.; Ganser, M.;: Combination of optical measurement technique and virtual process optimisation in sheet metal forming. Proceedings of the VIIth International Conference of Computational Plasticity (COMPLAS), 2003Barcelona; 07.04.2003-10.04.2003 mehr…
  • Golle, Matthias: Vergleich der Eigenschaften mechanisch und hydromechanisch gezogener Blechformteile. Dissertation, 2003 mehr…
  • Hoffmann, H.; Steinbeiss, H.; Hanss, T.: Rare parts on demand cloning of castings by X-rays and RP. 1st International Conference on Advanced Research in Virtual and Rapid Prototyping, VRAP 2003, 2003 mehr…
  • Hoffmann, H.; Vogl, C.: Determination of true stress-strain-curves and normal anisotropy in tensile tests with optical strain measurement. CIRP Annals - Manufacturing Technology 52 (1), 2003, 217-220 mehr…
  • Hoffmann, H.; Vogl, C.; Hwang, C.: Determination of flow curves and normal anisotropy through tensile tests and optical strain measurement. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 98 (10), 2003, 480-482 mehr…
  • Kerschner, M.; Erdmann, C.; Golle R.: Einfluss der Vorverformung, des Schneidspalts und des Eingriffswinkels auf die Flitterbildung beim Zerteilen von Aluminiumlegierungen. BlechInForm, 2003 mehr…
  • Meinhardt, J.; Volk, W.; Ganser, M.: Application of Simualtion Tools for Rapid Prototyping and Virtual Try-out. Proceedings International Conference on Accuracy in Forming Technology (ICAFT), Wissenschaftliche Scripten, 2003Chemnitz; 14.10.2003-15.10.2003 mehr…
  • Schilp, H.; Hoffmann, H.; Golle, R.; Hoogen, M.: Einfluss von Schneidparametern und Werkzeugwerkstoffen auf Kaltaufschweißungen. UTF Science (IV/2003), 2003 mehr…
  • Schilp, H.; Hoffmann, H.; Golle, R.; Hoogen, M.: Möglichkeiten der Flittermengenreduzierung beim Scherschneiden von Aluminium. VDI Wissensforum, 2003Tragende Hybridstrukturen mehr…

2002

  • UMFORMWERKZEUG ZUM HYDROMECHANISCHEN TIEFZIEHEN VON WERKSTÜCKEN AUS BLECHZUSCHNITTEN. 2002, (anderer Eintrag) mehr…
  • Hoffmann, H.; Kohnhäuser, M.: Strategies to optimize the part transport in crossbar transfer presses. CIRP Annals - Manufacturing Technology 51 (1), 2002, 27-32 mehr…
  • Hwang, C.; Golle, R.; Hoffmann, H.: Numerical method to estimate the wear of a tool in sheet metal forming. Numisheet, 2002 mehr…
  • Hwang, C.; Golle, R.; Hoffmann, H.: Numerical Approach to minimize tool wear in the sheet metal forming. 7th International Conference on Technology of Plasticity, 2002 mehr…
  • Meinhardt, J.; Volk, W.; Schmidt, H.: Neue Wege der virtuellen Prozessabsicherung in der Bauteilentstehungsphase. Proceedings „Neuere Entwicklungen in der Blechumformung“, 2002Fellbach; 04.06.2002-05.06.2002 mehr…
  • Meinhardt, J.; Volk, W.; Schmidt, H.: Virtuelle Prozessentwicklung von Presswerkzeugen im industriellen Umfeld. 17. Umformtechnisches Kolloquium Hannover; Umformtechnik – Erschließung wirtschaftlicher und technologischer Potenziale, 2002Hannover; 27.02.2002-28.02.2002 mehr…
  • Shuqin, X.; Hoogen, M.; Pyttel, T.; Hoffmann, H.: FEM simulation and experimental research on the AlMg4.5Mn0.4 sheet blanking. Journal of Materials Processing Technology 122 (2-3), 2002, 338-343 mehr…

2001

  • Verfahren zur Ermittlung von Umform-Kenngrößen an Blechformteilen. 2001, (anderer Eintrag) mehr…
  • Golle, M.; Semmler, S.; Hoffmann, H.: Der Einfluss des Vorformens auf schwach konturierte Bauteile. Kolloquium „Wirkmedien-Blechumformung“ an der Universität Dortmund, 2001, 63-77 mehr…
  • Kohnhäuser, M.; Hoffmann, H.; Venne, P.; Vette, W.: Optimized part transfer in large-sized presses. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb 96 (9), 2001, 504-508 mehr…
  • Luding, S.; Latzel, M.; Volk, W.; Diebels, S.; Herrmann, H. J.: From discrete element simulations to a continuum model. Computer Methods in Applied Mechanics and Engineering 191 (1-2), 2001, 21-28 mehr…
  • Renault, T.; Vardelle, M.; Fauchais, P.; Hoffmann, H.; Braillard, F.: On-line monitoring (SDC) through coating surface temperature of residual stresses in APS WC-Co17wt% coatings on Hastelloy X. Thermal Spray 2001 New Surfaces for a New Millennium: Proceedings of the International Thremal Spray Conferenc, 2001, 743-750 mehr…
  • Volk, Wolfram; Diebelsk, Stefan; Lätzel, Marc; Luding, Stefan: Analogiebetrachtungen für mikropolare Kontinua mit Anwendung auf den Biaxialversuch. Zur Beschreibung komplexen Materialverhaltens, Beiträge anlässlich des 50. Geburtstags von Herrn Prof. Dr.-Ing. Wolfgang Ehlers, Institut für Mechanik (Lehrstuhl), 2001, 189-206 mehr…

2000

  • Golle, Matthias; Hoffmann, Hartmut; Schnupp, Konrad; Stümke, Artur: The Innovative Control Technology for a New Hydroforming Press Concept. SAE Technical Paper, 2000, http://papers.sae.org/2000-01-2673/ mehr…
  • Luding, S.; Lätzel, M.; Volk, W.; Diebels, S.; Herrmann, H.J.: From discrete element simulations to a continuum model. European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2000, 2000 mehr…

1999

  • Ziehteile aus Federstahlblech, insbesondere als Leichtbau- oder Karosserieteil. 1999, (anderer Eintrag) mehr…
  • Verstellbares Werkzeug. 1999, (anderer Eintrag) mehr…
  • Ehlers, W.; Ellsiepen, P.; Volk, W.: Localization phenomena in saturated and empty frictional porous media computed by time- and space-adaptive methods. Proceedings European Conference on Computational Mechanics, ECCM 99, 1999München; 31.08.1999-03.09.1999 mehr…
  • Ehlers, W.; Volk, W.: Localization Phenomena in Liquid-Saturated and Empty Porous Solids. Transport in Porous Media 34 (1-3), 1999, 159-177 mehr…
  • Hoffmann, H.; Kohnhäuser, M.: Wirtschaftliche Blechumformung durch Simulation. Werkstatt und Betrieb 132 (6), 1999, 70-72 mehr…
  • Hoffmann, H.; Schweitzer, M.; Milberg, J.: Rotary blanking. CIRP Annals - Manufacturing Technology 48 (1), 1999, 213-216 mehr…

1998

  • Herstellverfahren für ein Bauteil aus einem Rohr aus kaltumformbarem Material, insbesondere Metall. 1998, (anderer Eintrag) mehr…
  • Antriebseinrichtung für eine schnelllaufende Stanz- und Schneidpresse. 1998, (anderer Eintrag) mehr…
  • Umformbares, bereits vorgeformtes, dünnwandiges Halbfabrikat aus insbesondere Metall. 1998, (anderer Eintrag) mehr…
  • Diebels, S.; Ehlers, W.; Ellsiepen, P.; Volk, W.: On the regularization of shear band phenomena in liquid-saturated and empty soils. Nonlocal aspects in solid mechanics, Proceedings of the EUROMECH-Colloquium 378, 1998, 58-63 mehr…
  • Ehlers, W.; Diebels, S.; Volk, W.: Die Bedeutung der Kompatibilitätsbedingung für mikropolare, elastisch-plastische Reibungsmaterialien. Große plastische Formänderungen - Mitteilungen aus dem Institut für Mechanik der Ruhr Universität Bochum; Heft 114, Ruhr Universität Bochum, 1998, 23-26 mehr…
  • Ehlers, W.; Diebels, S.; Volk, W.: Deformation and compatibility for elasto-plastic micropolar materials with application to geomechanical problems. JOURNAL DE PHYSIQUE IV 8 (PR8), 1998, 127-134 mehr…
  • Ehlers, W.; Volk, W.: Regularization of shear band phenomena in saturated and empty frictional granular porous solid materials. Keynote lectures of the Biot-Conference on Poromechanics, 1998Louvain-la-Neuve; 14.09.1998-16.09.1998 mehr…
  • Ehlers, W.; Volk, W.: Fundamental considerations on the numerical investigation of shear band phenomena in saturated and non-saturated frictional porous materials. Computational Mechanics: New Trends and Applications, Proceedings of the 4th World Congress on Computational Mechanics (CIMNE), CIMNE, 1998Buenos Aires; 29.06.1998-02.07.1998 mehr…
  • Ehlers, W.; Volk, W.: The shear band problem in soil-structure interaction. Proceedings of the International Conference on Soil-Structure Interaction in urban civil engineering (COST C7), Darmstadt University of Technology, 1998Darmstadt; 08.10.1998-09.10.1998 mehr…
  • Ehlers, W.; Volk, W.: Lokalisierung in mikropolaren fluid-gesättigten Böden. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM) 78, 1998, 365-366 mehr…
  • Ehlers, W.; Volk, W.: On theoretical and numerical methods in the Theory of Porous Media based on polar and non-polar elasto-plastic solid materials. International Journal of Solids and Structures 35 (34-35), 1998, 4597-4617 mehr…
  • Kopietz, J.; Golle, R.; Schnabel, J.; Dinkel, F.; Hoffmann, H.: Tiefziehbleche lackieren. Werkstatt und Betrieb , 1998, 928-933 mehr…
  • Kopietz, J.; Hoffmann, H.; Dinkel, F.; Schaller, S.: Die Oberflächenbeschaffenheit von Tiefziehblechen im Karosseriebau: Teil 2. ATZ Automobiltechnische Zeitschrift 100 (7-8), 1998, 558-565 mehr…

1997

  • Ehlers, W.; Diebels, S.; Ellsiepen; P.; Volk, W.: Localization phenomena in liquid-saturated soils. Proceedings of NAFEMS World Congress 97 on Design - Reliability and Application of Computational Methods, NAFEMS, 1997Stuttgart; 09.04.1997-11.04.1997, 287-298 mehr…
  • Ehlers, W.; Volk, W.: Stoffverhalten und Lokalisierung in der Theorie Poröser Medien. – Zwischenbericht zum gleichnamigen Forschungsvorhaben, Teilprojekt A6 des SFB 404 – Mehrfeldprobleme in der Kontinuumsmechanik. Bericht aus dem Institut für Mechanik ( Bauwesen), Nr. 97-II-4; Universität Stuttgart, 1997, mehr…
  • Ehlers, W.; Volk, W.: On shear band localization phenomena induced by elasto-plastic consolidation of fluid-saturated soils. Proceeding of the Computational Plasticity - Fundamentals and Applications (COMPLAS), 1997Barcelona; 17.03.1997-20.03.1997, 1657-1664 mehr…
  • Ehlers, W.; Volk, W.: Cosserat-Theorie für gesättigte poröse Festkörper. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM) 77 Supplement 1, 1997, 83-84 mehr…
  • Ehlers, Wolfgang; Volk, Wolfram: On shear band localization phenomena of liquid-saturated granular elastoplastic porous solid materials accounting for fluid viscosity and micropolar solid rotations. Mechanics of Cohesive-frictional Materials 2 (4), 1997, 301-320 mehr…
  • Hoffmann, H ; Golle, R ; Hein, P: Applications for a high frequency ultra sound inspection system. Blech Rohre Profile 44 (1-2), 1997, 42-45 mehr…

1996

  • Diebels, S.; Ehlers, W.; Mahnkopf, D.; Volk, W.: Elastoplastisches Stoffverhalten beim Konsolidationsproblem. Zeitschrift für Angewandte Mathematik und Mechanik (ZAMM) 76 Supplement 5, 1996, 119-120 mehr…

1995

  • Ehlers, W.; Diebels, S.; Volk, W.: Ein elastisch-plastisches Materialmodell für flüssigkeitsgesättigte poröse Festkörper unter Einbeziehung der Mikrorotation – Beiträge zur Mechanik (Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Reint de Boer). , Hrsg.: Walther, W.: Fachbereich Bauwesen; Universität-GH Essen, 1995, mehr…

1993

  • Golle, Roland: Über das Streckgrenzen- und Festigkeitsverhalten neuartiger Tiefziehwerkstoffe. Dissertation (Technische Universität München), 1993 mehr…

1989

  • Bareis, A.; Dommer, H.-M.; Hoffmann, H.: Flexibility in punching technology. New manufacturing systems for the production of electric motor plates in small batch sizes and on custom built basis. VDI-Z 131 (9), 1989, 107-111 mehr…
  • Hoffmann, H.: Economical fabrication with large panel transfer presses. Sheet Metal Industries 66 (4), 1989, 163 mehr…
  • Hoffmann, H.; Schneider, F.: Efficient production on large-component progressive presses, setup changing, controlling, and stacking parts. Werkstatt und Betrieb 122 (6), 1989, 489-491 mehr…
  • Hoffmann, H.; Schneider, F.: Large panel transfer presses. The basis for economic production technology in stamping plants. IPE. Industrial & production engineering 13 (3), 1989, 61-64 mehr…

1985

  • Hoffmann, H.; Panknin, W.: Accuracy Requirements of Fineblanking Presses. Strips Sheets Tubes 2 (1), 1985, 10-13 mehr…
  • Hoffmann, H.; Panknin, W.: Protective Systems and Feeds in Fineblanking Presses. Strips Sheets Tubes 2 (2), 1985, 38-40 mehr…
  • Hoffmann, H.; Panknin, W.: Schutzsysteme und Vorschübe bei Feinschneidpressen. Bänder Bleche Rohre 26 (3), 1985, 70-72 mehr…
  • Hoffmann, H.; Panknin, W.: Genauigkeitsanforderungen an Feinschneidpressen. Bänder Bleche Rohre 26 (2), 1985, 46-49 mehr…
  • Hoffmann, H.; Schneider, F.: Wirtschaftliche Fertigung kleiner Losgrößen am Beispiel der Dreiachsen-Transferpresse. Stahl und Eisen 105 (9), 1985, 29-34 mehr…

1976

  • Schneider, F.; Hoffmann, H.: Praktische Aspekte der Sicherheit bei Exzenter- und verwandten Pressen - 2. WT Z Ind Fertigung 66 (2), 1976, 81-86 mehr…
  • Schneider, F.; Hoffmann, H.: Praktische Aspekte der Sicherheit bei Exzenter- und verwandten Pressen - 1. WT Z Ind Fertigung 66 (1), 1976, 31-37 mehr…

1974

  • Hoffmann, H.: Gründung von Pressen. WT Z Ind Fertigung 64 (10), 1974, 612-615 mehr…